Camera module with Android
#1
Hi Everyone,

I just bought the PINE LTS Camera module and install it on the board as showing in this pic (https://store.pine64.org/wp-content/uplo..._large.jpg)
I'm using android 7.1.2 and I can not run the cam from any application, did I skipped something?

I just installed the cam and run camera application from the market and nothing happened, I install the droid info application and it seem it can not detect the camera module.

I didn't find anything in the wiki about the camera module.

- Kam
#2
(05-07-2019, 07:34 AM)Kam Wrote: Hi Everyone,

I just bought the PINE LTS Camera module and install it on the board as showing in this pic (https://store.pine64.org/wp-content/uplo..._large.jpg)
I'm using android 7.1.2 and I can not run the cam from any application, did I skipped something?

I just installed the cam and run camera application from the market and nothing happened, I install the droid info application and it seem it can not detect the camera module.

I didn't find anything in the wiki about the camera module.

- Kam

Use the stock Android 6.0 build, the camera driver already installed by default. https://wiki.pine64.org/index.php/SOPINE...ndroid_6.x
#3
im having the same issue with the camera, using android 6.01 from using the  sd to EMMC image
 so i thaut id re flash the EMMC using the usb adapter and do a fresh install with the camera but its just freezing on the SOPINE logo now 
it also gets errors when i finished flashing the EMMC using the adapter, this is my 2nd camera, i broke the first 1 and i have 2 emmc to usb modules
what's could be the issue here?

Pine64 LTS, 7 inch screen, 64gb EMMC, BT wifi, modified c4 labs case, 5AH lipo battery with the thermistor pcb from the pine 18650 pack
#4
i tried again with the sd to emmc image, it boots now but no camera,

a camera, accelerometer, and onboard sound would finish off my tablet project
#5
i have my camera working,
it only works when i downloaded the android 6.0 from the link above, and i used a 16GB micro SD,
it does not work if i use the images from the pine 64 installer for the EMMC

i also noticed my charge led and power led are working again after changing the software image


Possibly Related Threads…
Thread Author Replies Views Last Post
  Connecting the RaspBee ZigBee module to 5V/GND on the Euler bus causes issues karlitos 0 1,813 04-22-2021, 03:05 AM
Last Post: karlitos
  Camera module with Arch Linux IkerST 0 2,236 05-05-2020, 08:44 PM
Last Post: IkerST
  Zwave module on LTS saileshrajk 2 4,932 01-15-2018, 11:34 PM
Last Post: tllim
  is it possible to connect 2 Ethernet port to SOPINE module? eddylai 2 5,190 05-03-2017, 12:01 PM
Last Post: bobpaul
  Sopine Module and USB HDMI mbt28 1 4,258 01-23-2017, 08:13 AM
Last Post: MarkHaysHarris777

Forum Jump:


Users browsing this thread: 1 Guest(s)