PCIe for network // Networkanalyzer
#1
Hi,
I'm pretty new with the ROCKPro64.
I want to build a lowcost Networkanalyzer for PLC networks. For this reason i want be able to use different desktop adapters.
My Plan is to install Ubuntu on the ROCKPro64 and plug in my Network Adapter on the PCIe.
But im not shure if this will work.

Does any one have some experience with uising the PCIe on the ROCKPro for Ethernet?
Thx in advance Q
  Reply
#2
(05-07-2019, 05:28 AM)Questioneer Wrote: Hi,
I'm pretty new with the ROCKPro64.
I want to build a lowcost Networkanalyzer for PLC networks. For this reason i want be able to use different desktop adapters.
My Plan is to install Ubuntu on the ROCKPro64 and plug in my Network Adapter on the PCIe.
But im not shure if this will work.

Does any one have some experience with uising the PCIe on the ROCKPro for Ethernet?
Thx in advance Q

ayufan has the experience on porting 10Gbps Ethernet card in Rockpro64, you can approach him at PINE64 wiki (ROCK64 channel, http://pine64.xyz then /join #rock64).
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  RockPro64 pcie Gpu Davidos 6 1,507 03-20-2020, 02:07 PM
Last Post: bluciano
  PCIe failure odhinnhrafn 11 1,035 03-16-2020, 08:39 AM
Last Post: odhinnhrafn
Question Can we add PCIE hub 1 to many pcie card seaurchin 1 270 11-25-2019, 11:08 AM
Last Post: tllim
  Tested PCIe cards and output kram0000 5 554 10-24-2019, 01:17 PM
Last Post: xalius
  12V 3A power supply and NVMe - PCIe kaylios 3 306 08-25-2019, 03:31 AM
Last Post: kaylios
  Sometimes no power to SATA PCIe controller rble 4 401 06-16-2019, 11:03 PM
Last Post: rble
  PCIE SATA controller ASM1062 problems or software vecnar 36 3,057 06-15-2019, 02:35 AM
Last Post: Nikolay_Po
Question Status PCIe slot and the SATA interface card Yoast 21 3,597 05-28-2019, 02:22 PM
Last Post: Nikolay_Po
  Discovered issues with PCIe NVMe & GPU Load in desktop 4.4.174 causing board lockup axelf 0 217 04-08-2019, 03:51 PM
Last Post: axelf
  PCIe port specifications MisterA 0 398 12-11-2018, 02:55 AM
Last Post: MisterA

Forum Jump:


Users browsing this thread: 1 Guest(s)