Clusterboard startup issues
#4
(05-06-2019, 11:36 AM)AZClusterboard Wrote:
(05-06-2019, 06:10 AM)WhiteDragon Wrote:
(05-05-2019, 03:32 PM)WhiteDragon Wrote: Hey Guys and Gals,

So I recently acquired a Clusterboard  and wanted to take it for a spin. But no luck so far...

When I tried to start it with a single SoPine inserted nothing happened, so - dismayed - I tried another one and got a response: The lights went on and I got approximately three seconds of Christmas Tree Action. After that: Nothing...

After reading on this Forum I tried a Xenial 3.10 Build and now I get at least a heartbeat on the SoPine I inserted! But still no lights on the switch. Not even a status light on the RJ45 Socket...
Now I am worried that the board might be fried. 

Do you have any ideas?

(I'm still waiting for a USB/UART Adapter. Tried it with a DIY Arduino Thingy but that did not work. No UART Signal so far, or none detectable by the Arduino.)
Alright. It seemed to have bean the network issue described here: https://forum.armbian.com/topic/9402-eth...ne-module/

Logged in via a USB-Network Dongle and applied the fix. Didn't work then though. But the switch switched on the moment I pulled the USB-Network Dongle out of the socket.

What version of Armbian are you using?

At the moment I'm using Armbian 5.84 Debian Stretch with a 4.19.38 Kernel I built from source. It didn't work out of the box though.
I had to apply this fix described in the Armbian forums linked above.

I figure that the USB Network Dongle was mapped to a lower Hardware ID and the SoPine can only maintain a single network connection, thus the onboard NIC on the SoPine Module was deactivated. I figured furthermore that the switch on the Clusterboard is only powered, when at least one of the NICs on the SoPine Modules tries to communicate with it (I guess some sort of XOR gate controlling V_in or somesuch nonsense).
Since that did not happen due to the network bug the switch stayed "dark".


Messages In This Thread
Clusterboard startup issues - by WhiteDragon - 05-05-2019, 03:32 PM
RE: Clusterboard startup issues - by WhiteDragon - 05-06-2019, 06:10 AM
RE: Clusterboard startup issues - by WhiteDragon - 05-07-2019, 02:45 PM
RE: Clusterboard startup issues - by WhiteDragon - 05-08-2019, 04:21 PM
RE: Clusterboard startup issues - by WhiteDragon - 05-09-2019, 06:07 AM
RE: Clusterboard startup issues - by WhiteDragon - 05-09-2019, 12:32 PM
RE: Clusterboard startup issues - by WhiteDragon - 05-09-2019, 01:34 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Selling Clusterboard + 4 sopine xblack86 7 3,198 09-26-2022, 03:09 AM
Last Post: poVoq
  clusterboard availability? linear 1 665 07-17-2022, 06:44 AM
Last Post: poVoq
  Clusterboard not getting IP address after network fix Norlark 14 7,530 08-30-2021, 05:00 PM
Last Post: poVoq
  When would be the Clusterboard back on stock? __kzl__ 5 3,212 08-16-2021, 03:52 AM
Last Post: poVoq
  Managed Ethernet switch on the Clusterboard dsimic 4 2,539 07-28-2021, 03:54 AM
Last Post: dsimic
  Schematics for customising the Clusterboard TechDragon 0 1,376 05-25-2021, 10:28 AM
Last Post: TechDragon
Information Clusterboard Guide AZClusterboard 9 19,175 04-06-2021, 06:32 AM
Last Post: poVoq
Brick Clusterboard CAD drawings TeaPack 1 2,905 03-31-2021, 01:38 PM
Last Post: Pine
  New Clusterboard Setup wargfn 5 5,296 01-01-2021, 10:10 AM
Last Post: poVoq
  Clusterboard does not even turn on? poVoq 3 4,703 08-15-2020, 07:31 AM
Last Post: poVoq

Forum Jump:


Users browsing this thread: 1 Guest(s)