Help with getting a Marvell 9230 to work

[remikin]

I have similar problem, this is my 88SE9230:

Code:

01:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller (rev 11) (prog-if 01 [AHCI 1.0])
       Subsystem: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller
       Flags: bus master, fast devsel, latency 0, IRQ 247
       I/O ports at 0000
       I/O ports at 0000
       I/O ports at 0000
       I/O ports at 0000
       I/O ports at 0000
       Memory at fa040000 (32-bit, non-prefetchable) [size=2K]
       Expansion ROM at fa000000 [size=256K]
       Capabilities: [40] Power Management version 3
       Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
       Capabilities: [70] Express Legacy Endpoint, MSI 00
       Capabilities: [e0] SATA HBA v0.0
       Capabilities: [100] Advanced Error Reporting
       Kernel driver in use: ahci

And it can't recognize my disks, lsblk also show me only SD card, i use OpenMediaVault stretch armhf
Someone know what is wrong?

I found solution, i updated to newest ayufan kernel 5 and my disk is visible and working all good, pls try:
look at:
https://github.com/ayufan-rock64/linux-b...upgrade.md

You can use releases (not pre-releases) so skip first step.