Automatically run after power recovery
#11
Dears, can you tell me which GPIOs are used to control volume up volume down as when power gets back ROCK64 boots into recovery and I can not navigate through it.
  Reply
#12
[quote pid='46594' dateline='1558909836']




where can find the numbers of components to try this modification, the Rock64pro dont have component number in the board,
do you have a board outline with number components?

Can you help me?

[Image: attachment.php?aid=1336]

[/quote]
  Reply
#13
(07-27-2019, 08:51 PM)TheWiley Wrote: I played a bit with this today and found that the auto-power-on seems to work less than 1/3rd of the time for me. When it does work, I do see the ethernet NIC lights come on immediately and the board starts responding to ping 30-60 seconds later. When it doesn't work, I get no NIC lights. I think that means I have a hardware problem?

If it makes a difference, I'm running with the 12v/5A PSU.

It also seems to matter how long the power is off - I haven't checked systematically, but auto-start seems to be more reliable if the board is unplugged for more than a minute or so. Does that make sense?

Did you manage to find a solution? I have the same issue, only my board never auto boots after re-powering, not matter for how much time I unplug it. The green LED next to the power jack lights up, but the ethernet NIC lights don't. The only way to start it is by pushing the power button. I'm also using the 12V 5A PSU from the Pine store.
  Reply
#14
I have this problem with rockpro64 and PSU 12v5a from pinestore. Do you have any solutions ?
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Performance and Power Demand RockPro64 fotastisch 6 1,911 06-06-2020, 03:27 PM
Last Post: Atch
  RockPro64 Power input m.ekstrom 0 472 05-19-2020, 03:28 AM
Last Post: m.ekstrom
  ATX power supply ice2642 9 2,967 04-21-2020, 02:18 PM
Last Post: LMM
  USB Type-C Display cable support (for 2 in 1: Video + Power) Paprika88 0 465 02-12-2020, 06:47 AM
Last Post: Paprika88
  Possibility of remote power switch pfremm 0 418 02-09-2020, 01:31 PM
Last Post: pfremm
Question How to automatically reboot rockpro64 in case it shutdown abruptly ? seaurchin 2 690 11-25-2019, 08:46 AM
Last Post: tophneal
  Power consumption math Mentaluproar 0 416 11-21-2019, 11:02 AM
Last Post: Mentaluproar
  RockPro64 power consumption seiji 11 8,113 03-30-2019, 11:15 PM
Last Post: pfeerick
  After power loss, boot never gets to white LED josepht 6 1,984 02-07-2019, 10:29 AM
Last Post: josepht
  RTC power backup rahulsharma 0 454 01-10-2019, 05:50 AM
Last Post: rahulsharma

Forum Jump:


Users browsing this thread: 1 Guest(s)