(06-07-2019, 02:55 PM)pbut5 Wrote: @Mrfixit2001
And I can boot without a card in the pcie with the custom compiled kernel but with a card in the pcie it doesn't boot.
Ah - what's the current draw on your PCIe card. That may be your real problem here.
For instance, I can boot with the SATA card from Pine64, but putting a n 8W ATTO H680 in the slot definitely causes the board to halt immediately.
(06-07-2019, 07:34 AM)Mrfixit2001 Wrote: I would probably start by removing the resolution that's defined in /boot/extlinux/extlinux.conf and see if that helps!How do I save the change? I can't get the /boot mount point to mount rw...