RPi.GPIO python module for Pine A64/A64+
#37
If that OpenOCD driver uses the GPIO hardware directly (looks like it since there is a base address define), it will be different on the Pine and you have to look at how to port the GPIO driver for the bcm2835 to the A64 since the registers are also different... I prefer FTDI based JTAG adapters that implement the electrical part in hardware...
Come have a chat in the Pine IRC channel >>
  Reply


Messages In This Thread
RE: RPi.GPIO python module for Pine A64/A64+ - by xalius - 07-10-2016, 12:13 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  fm transmitter with gpio weasel18 2 4,751 09-10-2019, 04:28 AM
Last Post: desai_amogh
  How to use dts or other setup to declare gpio pin Interrupt (e.g. a button)? dkebler 1 3,546 06-12-2019, 10:37 AM
Last Post: dkebler
Lightbulb Sample GPIO codes highlighting RPi.GPIO-PineA64 and the PI bus MarkHaysHarris777 6 10,953 06-07-2019, 12:37 AM
Last Post: tllim
Star GPIO, SPI and I2C C++ Lib databit 7 11,037 02-04-2019, 05:45 AM
Last Post: Jeff R
Information Howto: Controlling Pine64 GPIO via the filesystem (sysfs) on linux pfeerick 4 11,752 01-24-2019, 03:36 AM
Last Post: Fifth
  GPIO and SPI SamR1 20 31,149 03-15-2018, 10:32 AM
Last Post: jomoengineer
Question GPIO shockr 7 14,578 03-11-2018, 01:52 AM
Last Post: jomoengineer
  Read GPIO problem shworker 14 20,926 08-17-2017, 01:21 PM
Last Post: martinayotte
  Cross-wired Uart Ports between two Pine Boards via Cat5 Cable MarkHaysHarris777 10 15,723 11-20-2016, 04:17 AM
Last Post: pfeerick
  GPIO fiq capability joseph 3 6,007 11-10-2016, 06:07 PM
Last Post: joseph

Forum Jump:


Users browsing this thread: 1 Guest(s)