Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities
#6
(03-01-2019, 10:40 AM)tuxd3v Wrote: In your case, that you want to see information about the disks( X is your drive letter, a,b,c,d and so on.. ):
1) Absolute paths:
Code:
/root/openSeaChest/Make/gcc/openseachest_exes/openSeaChest_Basics --deviceInfo --device /dev/sdX
2) Relative paths:
Code:
cd /root/openSeaChest/Make/gcc/openseachest_exes
./openSeaChest_Basics --deviceInfo --device /dev/sdX
Hey, thanks for your answer
I was too stupid last night, did not even come up with the idea to do it with ./openSeaChest_Basics. Sorry Blush
but unfortunately that does not work properly>  /root/openSeaChest/Make/gcc/openseachest_exes/openSeaChest_Basics --deviceInfo --device /dev/sdb > output >
Code:
/root/openSeaChest/Make/gcc/openseachest_exes/openSeaChest_Basics --deviceInfo --device /dev/sdb
==========================================================================================
openSeaChest_Basics - openSeaChest drive utilities - NVMe Enabled
Copyright (c) 2014-2018 Seagate Technology LLC and/or its Affiliates, All Rights Reserved
openSeaChest_Basics Version: 2.8.0-1_19_0 ARM
Build Date: Feb 28 2019
Today: Fri Mar  1 18:18:46 2019
==========================================================================================
open: Bad address
open failure
Error: 14 - Bad address
Error: Could not open handle to /dev/sdb
my hard drives >
Code:
:~# df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            1.9G     0  1.9G   0% /dev
tmpfs           388M   40M  348M  11% /run
/dev/mmcblk1p7   57G  8.8G   46G  17% /
tmpfs           1.9G  8.0K  1.9G   1% /dev/shm
tmpfs           5.0M  8.0K  5.0M   1% /run/lock
tmpfs           1.9G     0  1.9G   0% /sys/fs/cgroup
tmpfs           1.9G   36K  1.9G   1% /tmp
/dev/mmcblk1p6  112M   10K  112M   1% /boot/efi
/dev/sda1       458G  266G  193G  58% /srv/dev-disk-by-label-Daten2
/dev/sdb1       3.6T  2.3T  1.4T  64% /srv/dev-disk-by-label-Daten
folder2ram      1.9G  499M  1.5G  26% /var/log
folder2ram      1.9G     0  1.9G   0% /var/tmp
folder2ram      1.9G  724K  1.9G   1% /var/lib/openmediavault/rrd
folder2ram      1.9G  1.6M  1.9G   1% /var/spool
folder2ram      1.9G   16M  1.9G   1% /var/lib/rrdcached
folder2ram      1.9G   12K  1.9G   1% /var/lib/monit
folder2ram      1.9G  4.0K  1.9G   1% /var/lib/php
folder2ram      1.9G  4.0K  1.9G   1% /var/lib/netatalk/CNID
folder2ram      1.9G  524K  1.9G   1% /var/cache/samba
overlay          57G  8.8G   46G  17% /var/lib/docker/overlay2/915c4ad2cc7d3cde1e6bede0bf6fccd152a371fe96a1dc7b3c388486136dc2db/merged
overlay          57G  8.8G   46G  17% /var/lib/docker/overlay2/926760e4cc0d73f08bc8d1c9acffad1b88c77f116812f790d4e29403509b9ca4/merged
overlay          57G  8.8G   46G  17% /var/lib/docker/overlay2/f5093a63511d249a8c80d8752f60ddc4fb166944dac056b354adf853053d8c5d/merged
shm              64M     0   64M   0% /var/lib/docker/containers/db1a35c9e6185adf6e04a220da21a23d1ecaf5dabb19e9600938c4fcfcef0490/mounts/shm
shm              64M     0   64M   0% /var/lib/docker/containers/e41de1c0c35a1dccf993ee58f88e610f910506bbc7526aa6b6a285b99a74bc0e/mounts/shm
shm              64M     0   64M   0% /var/lib/docker/containers/04dc60abbb2bab37469103288fb74ba2e0d119ec9a74bc31e0771221c9c853f9/mounts/shm
overlay          57G  8.8G   46G  17% /var/lib/docker/overlay2/82205090b3380be4d858d032a57cd65e99143ad7f6c56ea72710d77dddcc6283/merged
shm              64M     0   64M   0% /var/lib/docker/containers/99caab121e27b07f61b49427783d880f3f8f9349f9b98807dec560a5f427c699/mounts/shm
tmpfs           388M     0  388M   0% /run/user/0
That's why I wanted to test that first.
I try that with  >
Quote:In this way, you can use all tools, but its boring since you can follow steps 4,5,6.. and after that you can purely issue the command you want too

(03-01-2019, 10:40 AM)tuxd3v Wrote: In this way, you can use all tools, but its boring since you can follow steps 4,5,6.. and after that you can purely issue the command you want too
It does not work...
Quote:7) Now try to see if root, knows about OpenSeachest Utilities:
type "open" and press <TAB>, you will see at least :
No Answer....
Quote:4) Wait for compilation to Finish, and check if there are erros at the end.
    If there are no errors, then copy binaries to final destination and remove code stuff used to compile:
Code:
mkdir -pv /opt/openSeaChest/bin && mv openseachest_exes/* /opt/openSeaChest/bin
cd / && rm -rf /root/openSeaChest
The folder has now been deleted > cd / && rm -rf /root/openSeaChest ......... I now need everything from new download and > cd openSeaChest/Make/gcc && make release > re-execute?
Code:
:/opt/openSeaChest/bin# ls -la
total 8640
drwxr-xr-x 2 root root   4096 Mar  1 19:25 .
drwxr-xr-x 3 root root   4096 Mar  1 19:25 ..
-rwxr-xr-x 1 root root 747660 Feb 28 19:53 openSeaChest_Basics
-rwxr-xr-x 1 root root 733056 Feb 28 19:53 openSeaChest_Configure
-rwxr-xr-x 1 root root 737828 Feb 28 19:53 openSeaChest_Erase
-rwxr-xr-x 1 root root 636864 Feb 28 19:56 openSeaChest_Firmware
-rwxr-xr-x 1 root root 729564 Feb 28 19:56 openSeaChest_FormatUnit
-rwxr-xr-x 1 root root 752088 Feb 28 19:53 openSeaChest_GenericTests
-rwxr-xr-x 1 root root 824812 Feb 28 19:56 openSeaChest_Info
-rwxr-xr-x 1 root root 700332 Feb 28 19:56 openSeaChest_Logs
-rwxr-xr-x 1 root root 739004 Feb 28 19:56 openSeaChest_NVMe
-rwxr-xr-x 1 root root 743072 Feb 28 19:53 openSeaChest_PowerControl
-rwxr-xr-x 1 root root 741984 Feb 28 19:53 openSeaChest_SMART
-rwxr-xr-x 1 root root 725144 Feb 28 19:56 openSeaChest_ZBD
  Reply


Messages In This Thread
RE: Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities - by Neo2018 - 03-01-2019, 11:48 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Tutorial:How to Configure ATS Fan control tuxd3v 23 9,230 04-12-2020, 05:35 AM
Last Post: FalconX
Video How to Install Google PlayStore NightCrawler504 2 522 04-08-2020, 02:20 PM
Last Post: pino88
Wink Tutorial[ Seagate Disks ]: Optimize Life Span/Power Managment tuxd3v 14 1,625 06-19-2019, 04:40 AM
Last Post: Neo2018
Video Video and Guide to install Android to emmc no emmc to usb adapter NightCrawler504 0 545 04-21-2019, 07:19 PM
Last Post: NightCrawler504
  Tutorial[ Multimedia ] : Play DVD movies tuxd3v 0 289 02-26-2019, 07:21 PM
Last Post: tuxd3v
  Tutorial[ OpenCL ]: OpenCL 1.2 FULL_PROFILE Working tuxd3v 0 1,099 11-06-2018, 01:03 PM
Last Post: tuxd3v
  HOW TO - install linux on emmc without etcher or USB adapter dukla2000 4 3,045 07-31-2018, 12:40 PM
Last Post: dukla2000

Forum Jump:


Users browsing this thread: 1 Guest(s)