02-18-2020, 09:00 PM
I did (on a Pi)
And stuck the SD into my PBP. But when I power it up I see nothing of course. This isn't a VT-100 terminal that knows how to show ASCII text, it has to be turned into video first. Maybe the DTD can enable that, I didn't use it. Maybe a serial console would show what's going on. It could be sitting there in the install menu, I can't tell. Hmm.
Code:
dd if=miniroot66.fs of=/dev/sdb bs=1M
dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8
And stuck the SD into my PBP. But when I power it up I see nothing of course. This isn't a VT-100 terminal that knows how to show ASCII text, it has to be turned into video first. Maybe the DTD can enable that, I didn't use it. Maybe a serial console would show what's going on. It could be sitting there in the install menu, I can't tell. Hmm.