Cannot get RockPro64 to boot
#1
I just got a brand new RockPro64 yesterday and I have not been able to get it to boot. I've tried several different OS images (OMV, Ubuntu, Debian, and Armbian). I've tried 2 different microSD cards. I've tried prepping the microSD cards using Ubuntu and MacOS, using built in tools and Etcher.

I get the same results no matter what I do:
  • The green power LED turns on
  • Ethernet lights turn on, and blink as if there is activity but never appears on my network.
  • If I hold down the power button the ethernet lights turn off
I am definitely using RockPro64 OS images.


Am I doing something wrong or did I get a bad board?

::UPDATE::
I sent the board back to the store I bought it from and they determined that it had a faulty MicroSD card reader.
  Reply
#2
Turns the whit LED on? Do you have an working UART adapter?
Sorry for any mistakes. English is not my native language

1. RP64 v2.1 / PCIe SATA Marvell 88SE9230 Chipsatz / sd-card / 2 * 3,5 Zoll 4TB HDD (raid1) / using as NAS / Kernel 4.4.202-1237-rockchip-ayufan-gfd4492386213 / Booting from an USB3 SSD

2. RP64 v2.1 / testing.....testing....testing 

https://forum.frank-mankel.org/category/14/rockpro64
  Reply
#3
(01-05-2019, 11:02 PM)randyc Wrote: I just got a brand new RockPro64 yesterday and I have not been able to get it to boot. I've tried several different OS images (OMV, Ubuntu, Debian, and Armbian). I've tried 2 different microSD cards. I've tried prepping the microSD cards using Ubuntu and MacOS, using built in tools and Etcher.

I get the same results no matter what I do:
  • The green power LED turns on
  • Ethernet lights turn on, and blink as if there is activity but never appears on my network.
  • If I hold down the power button the ethernet lights turn off
I am definitely using RockPro64 OS images.


Am I doing something wrong or did I get a bad board?

My waters say your board is OK. It could be the SDcard slot is non-functional, or your SDcard writing is duff (yeaf I hear you have maultiple/many tries!)
Green LED means your PSU works as far as the socket on the RPro64
Flashing Ethernet lights mean the board is trying to boot BUT
NO white LED means no bootable image found.

As per Bullet64 tracing with a UART adapter would be ideal. But - my 6p is
1) Stick to the Ubuntu minimal image here.
2) Check this thread.
* ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Started Bionic minimal - now eoan, Openbox desktop for general purpose daily PC.
* PinePhone BraveHeart :-)
  Reply
#4
(01-06-2019, 01:09 AM)Bullet64 Wrote: Turns the whit LED on? Do you have an working UART adapter?

No white LEDs. And no, unfortunately I don't have an UART adapter either.

(01-06-2019, 10:35 AM)dukla2000 Wrote: My waters say your board is OK. It could be the SDcard slot is non-functional, or your SDcard writing is duff (yeaf I hear you have maultiple/many tries!)
Green LED means your PSU works as far as the socket on the RPro64
Flashing Ethernet lights mean the board is trying to boot BUT
NO white LED means no bootable image found.

As per Bullet64 tracing with a UART adapter would be ideal. But - my 6p is
1) Stick to the Ubuntu minimal image here.
2) Check this thread.

I just tried the Ubuntu minimal image and same result - completely unresponsive other than green power light and ethernet lights.
I read through the linked thread but unfortunately it seems there was never a confirmed resolution by the OP?

Thanks to both of you for trying to help.
  Reply
#5
Had an off-the-wall thought - presume you do not have an eMMC? If you do, remove it as it has boot preference. (Or it is perfectly possible to flash an image to it as per this thread.)

In any event, jumper the eMMC and SPI to prevent them interfering with an SDcard boot.  Arguably in a previous life someone messed with the SPI on your board.
* ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Started Bionic minimal - now eoan, Openbox desktop for general purpose daily PC.
* PinePhone BraveHeart :-)
  Reply
#6
(01-07-2019, 06:02 AM)dukla2000 Wrote: Had an off-the-wall thought - presume you do not have an eMMC? If you do, remove it as it has boot preference. (Or it is perfectly possible to flash an image to it as per this thread.)

In any event, jumper the eMMC and SPI to prevent them interfering with an SDcard boot.  Arguably in a previous life someone messed with the SPI on your board.


Yeah, I don't have an eMMC. I tried the jumper(s) and still had the same result. I contacted the store I bought the board from and they've set me up with an RMA. Hopefully I'll have better luck with a new one.

Thanks for trying to help!

::UPDATE::
I sent the board back to the store I bought it from and they determined that it had a faulty MicroSD card reader.
  Reply
#7
I got my new RockPro64 today.
I couldn't get it to boot either. The lights were on, but no-one was home.
Then, after swapping out the SD card for a premium one, it worked!
Smile
Spent the evening flashing images, ahem.
Nice board, I'm not sure what I'll do with it yet, but thats part of the fun!
Thanks to all the devs for all their hard work Smile
  Reply
#8
Great to hear @andyburn!

Yeah I've seen various threads of people having trouble booting from SD card. Even when using the Pine64 installer. The reality of it is, SD cards are just super unreliable in general. I have had great luck with a new 32 Gb Sandisk SD card fresh out of the box from WalMart. Any image I want flashes/ boots fine onto it using the Pine64 installer.

On the other hand, I have had ZERO luck trying to flash a 32 Gb PNY card that I used to use in a mobile phone. I don't know if using it in an Android phone does something to it to screw of the file-system or what, but no luck whatsoever with that card. I even tried formatting it with 'fdisk' to try to clean it with no luck.

So point being, anyone having trouble booting from an SD card, if it is not a new card, and you used it in a mobile phone or some other device previously, I STRONGLY recommend trying to flash a brand new card. Try it before you decide you have a bad board. Most likely it is the SD card you are using and not your new board (although to be fair, @andyburn had a bad board according to the manufacturer, but I'm guessing this is the minority of cases).

Knowing now how unreliable SD cards are (for example read --> https://www.bunniestudios.com/blog/?p=3554), long term I certainly plan on buying the PCIe adapter and hooking my board up to a nice SSD hard drive. I really like the board so far, and I'd like to set it up as a reliable home dev server, and not worry about the SD card taking a shit on me.
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  No /dev/gpiochip[n] on RockPro64. Faradn 2 152 03-25-2020, 08:50 PM
Last Post: Faradn
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 28 2,534 03-20-2020, 09:19 AM
Last Post: hunderteins
  sw4 jumper for disabling eMMC boot / multiboot ChriChri 0 69 03-09-2020, 08:54 AM
Last Post: ChriChri
  Performance and Power Demand RockPro64 fotastisch 5 376 02-11-2020, 10:48 AM
Last Post: bavay
  Rockpro64 Case WIP xbcsmith 0 176 01-26-2020, 05:05 PM
Last Post: xbcsmith
  Rockpro64 Case WIP xbcsmith 0 97 01-26-2020, 05:02 PM
Last Post: xbcsmith
  RockPro64 & Roshambo Case Gouki 2 351 01-26-2020, 12:57 AM
Last Post: EagleFlyFree
  rockpro64 support in the rockchip uboot dedoz 0 176 01-13-2020, 01:51 PM
Last Post: dedoz
  RockPro64 Official uboot download dedoz 1 213 01-11-2020, 09:53 PM
Last Post: tophneal
  RockPro64 as Synology NAS alternative!? hemertje 4 423 12-23-2019, 03:34 PM
Last Post: Bullet64

Forum Jump:


Users browsing this thread: 1 Guest(s)