Tutorial:How to Configure ATS Fan control

[tuxd3v]

Thanks for quick support.

You need to install the version that is in master branch.. do this:

Code:

luarocks build https://raw.githubusercontent.com/tuxd3v/ats/master/ats-master-0.rockspec

Great it works now! Super Software Thanks for that!

You Welcome,
thanks 

Sorry, but which plug exactly 23 ? >  23     CON15         4     DC out for SATA disk cable (direct connect from DC-IN)
The plug is occupied with me HDD power supply / Power Cable for dual SATA Drives / (PCI-e to Dual SATA-II Interface Card).
Or am I completely wrong? How should it all look like? Do you have an example photo / picture? I do not understand.
Do you mean that reply? How is it controlled?

Is there another way to cool the "NASCase" with GRIPO / Script / Python etc .... Does somebody has any idea?

I was thinking about the conector 23..
But you already have it populated with Sata power for the disk..

1) If you are not using too much CPU:
    The CPU heatsink alone will do, without any fan above..
    In this case,
    You can put the NasFan connected to Fan Conector 4.

2) If you have, the CPU processing a  lot:
    You would need to have a conector that will do,1 conector -> to 2 power derivation, connected to Conector 23.
    In this way,
    You can have power to disks, and power to  NASFan, but no control of NasFan, ON/OFF, etc, Fan will be always at Max speed   

   To Control NasFan in this situation, you will need one of the options:
      2a) The romtorwator, solution of a thermostat, or other identical..
      2b)  Or a replication, of the circuit schematic that control pwm for fan in RockPro64 ( page 6 ),
             The possibility of this situation will be addressed in future versions of ATS, were will be there a option for GPIO PWM..
             Also, at the moment there are options to control GPIO on 3.9 Working Features, search there for "GPIO pins"..

             But the power circuitry, will need to exist in some form, ( ..it could be connected to Conector 23, and a pin connected to GPIO, for example, for pwm control  )