Rockpro death: USB3 does not supply power for a 2.5 HDD
#1
I had a 2.5 HDD on the USB3 connector without a separate power supply. It worked any weeks. Then the rockpro dies during work on it. The Kernel can't find the filesystem. After then boot hangs on initilize the USB stack.
Code:
[    1.352012] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[    1.352917] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
[    1.353925] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[    1.354941] xhci-hcd xhci-hcd.8.auto: irq 226, io mem 0xfe800000
[    1.355797] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.356557] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.357372] usb usb3: Product: xHCI Host Controller
[    1.357931] usb usb3: Manufacturer: Linux 4.4.143 xhci-hcd
[    1.358543] usb usb3: SerialNumber: xhci-hcd.8.auto
[    1.359676] hub 3-0:1.0: USB hub found
[    1.360143] hub 3-0:1.0: 1 port detected
[    1.360907] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[    1.361702] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[    1.362613] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.363622] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.364394] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.365206] usb usb4: Product: xHCI Host Controller
[    1.371283] usb usb4: Manufacturer: Linux 4.4.143 xhci-hcd
[    1.377381] usb usb4: SerialNumber: xhci-hcd.8.auto
[    1.383998] hub 4-0:1.0: USB hub found
[    1.389876] hub 4-0:1.0: 1 port detected
[    1.397017] xhci-hcd xhci-hcd.8.auto: remove, state 1
[    1.402020] usb usb4: USB disconnect, device number 1
[    1.427810] xhci-hcd xhci-hcd.8.auto: Host not halted after 16000 microseconds.
[    1.432979] xhci-hcd xhci-hcd.8.auto: Host controller not halted, aborting reset.
[    1.438125] xhci-hcd xhci-hcd.8.auto: USB bus 4 deregistered
[    1.443179] xhci-hcd xhci-hcd.8.auto: remove, state 1
[    1.447953] usb usb3: USB disconnect, device number 1
[    1.453175] xhci-hcd xhci-hcd.8.auto: USB bus 3 deregistered
[    1.464310] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    1.470741] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 3
[    1.477125] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[    1.483458] xhci-hcd xhci-hcd.9.auto: irq 227, io mem 0xfe900000
[    1.487011] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.490328] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.493644] usb usb3: Product: xHCI Host Controller
[    1.496725] usb usb3: Manufacturer: Linux 4.4.143 xhci-hcd
[    1.499868] usb usb3: SerialNumber: xhci-hcd.9.auto
@

I'am afraid the board is broken. Any ideas what I can do?


Possibly Related Threads…
Thread Author Replies Views Last Post
  ROCKPro64 Battery Power Supply hoarfrosty 11 1,628 09-23-2023, 04:17 PM
Last Post: hoarfrosty
  Can i use this Emmc for Rockpro 64 Supratec 0 400 09-02-2023, 06:38 AM
Last Post: Supratec
  RP64 Won't Boot After Power Down ColPanic_ 10 7,482 06-27-2023, 07:31 AM
Last Post: dkebler
  NAS Setup: Hdds PSU external power option Robotik 1 1,662 07-18-2022, 10:10 PM
Last Post: zer0sig
  NAS case HDD power cable failure (buck failure) ashleymills 1 1,824 04-01-2022, 11:25 AM
Last Post: ashleymills
  Power In Via DC Out actionhank 0 1,256 01-28-2022, 09:45 AM
Last Post: actionhank
  usb3 ethernet problem LMM 1 2,064 06-06-2021, 03:21 AM
Last Post: LMM
  How to add an external power button? foresto 6 8,911 02-05-2021, 10:38 PM
Last Post: foresto
  NAS mods: external serial port and power button foresto 4 6,359 10-04-2020, 11:21 PM
Last Post: zer0sig
  Power Supply - Barrel length Wiing 2 3,509 09-20-2020, 12:38 AM
Last Post: Wiing

Forum Jump:


Users browsing this thread: 1 Guest(s)