How to get started?
#10
(04-27-2016, 10:46 AM)chrwei Wrote: the Android/Remix are less than 2GB and give zero indication of their requirement by looking at it, and the phoenixcard app just generically fails if the card is too small.

Again knowledge is power. Lets empower some people.

http://imgur.com/IsnHS2i

The data in the blue box, is for the dd image. The dd image was created by a kind soul who did the phoenix install to a 8GB card for those who cannot use phoenix. It absolutely required an 8gb card as thats what it was made from and it is compressed to 1.2GB in size.

The data in the green box is for the phoenix image. It is under 500MB in size and will likely fit on 1 or 2GB microsd thought I admit I have not tried. I will in a  few mins though.


Just put the latest Rem image on a 2GB Samsung microsd. 
Code:
[2016/4/27 13:14:48] Find 4 device,Please select correct the one.
[2016/4/27 13:16:4] Formatting the card...
[2016/4/27 13:16:17] Start Burning...
[2016/4/27 13:16:18] [pheonix card_00]Burn Sucess
[2016/4/27 13:16:19] [pheonix card_10]Burn Sucess
[2016/4/27 13:16:19] [MBR]Burn Sucess
[2016/4/27 13:16:21] [bootloader]Burn Sucess
[2016/4/27 13:16:21] [env]Burn Sucess
[2016/4/27 13:16:23] [boot]Burn Sucess
[2016/4/27 13:18:29] [system]Burn Sucess
[2016/4/27 13:18:31] [misc]Burn Sucess
[2016/4/27 13:18:32] [recovery]Burn Sucess
[2016/4/27 13:18:52] [DATA File]Burn Sucess
[2016/4/27 13:18:52] [pheonix card_00]Check Complete
[2016/4/27 13:18:52] [pheonix card_10]Check Complete
[2016/4/27 13:18:52] [MBR]Check Complete
[2016/4/27 13:18:52] [bootloader]Check Complete
[2016/4/27 13:18:52] [env]Check Complete
[2016/4/27 13:18:52] [boot]Check Complete
[2016/4/27 13:18:54] [system]Check Complete
[2016/4/27 13:18:54] [misc]Check Complete
[2016/4/27 13:18:54] [recovery]Check Complete
[2016/4/27 13:18:54] [DATA File]Check Complete
[2016/4/27 13:18:54] Magic Complete
[2016/4/27 13:18:54] Burn End...
And just did it to a 1gb as well.
So yes the Phoenix images can be burned to as small as a 1GB card at this point.


Messages In This Thread
How to get started? - by riahim - 04-17-2016, 06:30 PM
RE: How to get started? - by Ghost - 04-17-2016, 08:33 PM
RE: How to get started? - by PKB2003 - 05-19-2016, 02:00 PM
RE: How to get started? - by Luke - 05-19-2016, 02:06 PM
RE: How to get started? - by PKB2003 - 05-19-2016, 02:23 PM
RE: How to get started? - by Ghost - 05-19-2016, 03:05 PM
RE: How to get started? - by PKB2003 - 05-19-2016, 03:13 PM
RE: How to get started? - by Ghost - 05-19-2016, 03:18 PM
RE: How to get started? - by Luke - 05-19-2016, 06:14 PM
RE: How to get started? - by PKB2003 - 05-21-2016, 11:43 AM
RE: How to get started? - by riahim - 04-17-2016, 08:57 PM
RE: How to get started? - by chrwei - 04-23-2016, 05:28 PM
RE: How to get started? - by macman - 04-26-2016, 11:26 PM
RE: How to get started? - by Ghost - 04-27-2016, 01:17 AM
RE: How to get started? - by chrwei - 04-27-2016, 07:04 AM
RE: How to get started? - by rahlquist - 04-27-2016, 10:33 AM
RE: How to get started? - by chrwei - 04-27-2016, 10:46 AM
RE: How to get started? - by rahlquist - 04-27-2016, 11:13 AM
RE: How to get started? - by chrwei - 05-14-2016, 09:30 AM
RE: How to get started? - by pine64noob - 05-23-2016, 03:04 PM
RE: How to get started? - by Ghost - 05-23-2016, 03:22 PM
RE: How to get started? - by pine64noob - 05-24-2016, 10:41 PM
RE: How to get started? - by huckfidle - 07-02-2016, 06:55 PM
RE: How to get started? - by PKB2003 - 05-23-2016, 11:24 PM
RE: How to get started? - by tllim - 05-24-2016, 10:20 AM
RE: How to get started? - by trey1963 - 05-24-2016, 02:17 PM
RE: How to get started? - by Ghost - 05-25-2016, 12:16 AM
RE: How to get started? - by tllim - 05-25-2016, 04:39 PM
RE: How to get started? - by GSam - 11-15-2016, 08:52 AM
RE: How to get started? - by Armbian User - 11-15-2016, 12:59 PM
RE: How to get started? - by GSam - 11-15-2016, 01:08 PM
RE: How to get started? - by pfeerick - 11-15-2016, 08:58 PM
RE: How to get started? - by MarkHaysHarris777 - 11-15-2016, 11:12 PM
RE: How to get started? - by GSam - 11-29-2016, 12:46 PM
RE: How to get started? - by pfeerick - 11-29-2016, 05:56 PM
RE: How to get started? - by hikmetsezen - 10-19-2017, 02:04 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Getting started in nRF52 in pinetime64 Quim 0 2,157 06-14-2020, 02:02 PM
Last Post: Quim
  PineA64 Getting Started Guide khgoh 12 25,627 03-04-2017, 08:53 PM
Last Post: Doryan
  Getting started using OSX cranchh 17 32,064 06-23-2016, 11:40 AM
Last Post: killorfb

Forum Jump:


Users browsing this thread: 1 Guest(s)