KDE Install on new Pinebook, howto?
#1
So what now? I have downloaded and etched the latest KDE image on a micro SD.
Now I put the card into the Pinebook and that thing boots into a nice Linux KDE Desktop.
Now, how do I move that image to the eMMC?
Bear in mind, the eMMC is empty and unformatted, I only have the KDE on the micro SD....
  Reply
#2
(11-08-2018, 06:40 AM)Corkonian Wrote: So what now? I have downloaded and etched the latest KDE image on a micro SD.
Now I put the card into the Pinebook and that thing boots into a nice Linux KDE Desktop.
Now, how do I move that image to the eMMC?
Bear in mind, the eMMC is empty and unformatted, I only have the KDE on the micro SD....

Everything you need is in the wiki - NOOB section. But I'll make it easy for you: option 1) download the image you want to your installation running from SD. DD the downloaded image  to the eMMC from within the environment on SD as you would on any other computer to any other media; option 2) use FEL SD card OR open up the Pinebook and use the FEL button + A-to-A cable.
You can find me on IRC, Discord and Twitter


  Reply
#3
(11-08-2018, 08:59 AM)Luke Wrote:
(11-08-2018, 06:40 AM)Corkonian Wrote: So what now? I have downloaded and etched the latest KDE image on a micro SD.
Now I put the card into the Pinebook and that thing boots into a nice Linux KDE Desktop.
Now, how do I move that image to the eMMC?
Bear in mind, the eMMC is empty and unformatted, I only have the KDE on the micro SD....

Everything you need is in the wiki - NOOB section. But I'll make it easy for you: option 1) download the image you want to your installation running from SD. DD the downloaded image  to the eMMC from within the environment on SD as you would on any other computer to any other media; option 2) use FEL SD card OR open up the Pinebook and use the FEL button + A-to-A cable.

Been there. Downloaded image and etched.
a) KDE Neon image doesn't show up as microSD to eMMC - which is akward.
b) No other cables or adapters available
c) sudo ./Pine64_install_to_eMMC.sh won't work as I only have an 8GB microSD at hand
  Reply
#4
(11-08-2018, 09:21 AM)Corkonian Wrote:
(11-08-2018, 08:59 AM)Luke Wrote:
(11-08-2018, 06:40 AM)Corkonian Wrote: So what now? I have downloaded and etched the latest KDE image on a micro SD.
Now I put the card into the Pinebook and that thing boots into a nice Linux KDE Desktop.
Now, how do I move that image to the eMMC?
Bear in mind, the eMMC is empty and unformatted, I only have the KDE on the micro SD....

Everything you need is in the wiki - NOOB section. But I'll make it easy for you: option 1) download the image you want to your installation running from SD. DD the downloaded image  to the eMMC from within the environment on SD as you would on any other computer to any other media; option 2) use FEL SD card OR open up the Pinebook and use the FEL button + A-to-A cable.

Been there. Downloaded image and etched.
a) KDE Neon image doesn't show up as microSD to eMMC - which is akward.
b) No other cables or adapters available
c) sudo ./Pine64_install_to_eMMC.sh won't work as I only have an 8GB microSD at hand

I am not sure you understood me, read the Flashing to eMMC from a SD Boot (Allwinner A64 Devices) in NOOB section.
You can find me on IRC, Discord and Twitter


  Reply
#5
(11-08-2018, 09:55 AM)Luke Wrote:
(11-08-2018, 09:21 AM)Corkonian Wrote:
(11-08-2018, 08:59 AM)Luke Wrote:
(11-08-2018, 06:40 AM)Corkonian Wrote: So what now? I have downloaded and etched the latest KDE image on a micro SD.
Now I put the card into the Pinebook and that thing boots into a nice Linux KDE Desktop.
Now, how do I move that image to the eMMC?
Bear in mind, the eMMC is empty and unformatted, I only have the KDE on the micro SD....

Everything you need is in the wiki - NOOB section. But I'll make it easy for you: option 1) download the image you want to your installation running from SD. DD the downloaded image  to the eMMC from within the environment on SD as you would on any other computer to any other media; option 2) use FEL SD card OR open up the Pinebook and use the FEL button + A-to-A cable.

Been there. Downloaded image and etched.
a) KDE Neon image doesn't show up as microSD to eMMC - which is akward.
b) No other cables or adapters available
c) sudo ./Pine64_install_to_eMMC.sh won't work as I only have an 8GB microSD at hand

I am not sure you understood me, read the Flashing to eMMC from a SD Boot (Allwinner A64 Devices) in NOOB section.
On the latest KDE image /usr/local/sbin is empty. No script there. No way to do a pine64_install_to_eMMC
  Reply
#6
1) Boot from SD; 2) Open browser and download the image you want to flash; 3) DD to eMMC 4) take SD out; 5) boot from eMMC.
Not sure if I can make it clearer
You can find me on IRC, Discord and Twitter


  Reply
#7
(11-08-2018, 11:31 AM)Luke Wrote: 1) Boot from SD; 2) Open browser and download the image you want to flash; 3) DD to eMMC 4) take SD out; 5) boot from eMMC.
Not sure if I can make it clearer

As I said in my original post: only 8 GB SD available.
Can't make it any clearer, sorry.
  Reply
#8
This is what I am going to try. I am in the process so YMMV

Use this info to figure out which mirror downloads the fastest https://files.kde.org/neon/images/pinebo...mirrorlist 


IMAGE_URL=https://files.kde.org/neon/images/pinebook-remix-nonfree/useredition/20181028-1500/neon-pinebook-remix-useredition-20181028-1500-arm64-1080p.img.gz

Booted from the sd card.



Code:
umount -f /dev/mmcblk1*

curl -L -f "$IMAGE_URL" | gzip -d | dd bs=30M of=/dev/mmcblk1

sync

Also would like to point out that pine64_install_to_eMMC.sh is an ayufan script. It will not work with the KDE Neon remix

Update this worked for me. (I didn't like the dd from curl as I wanted to verify the chksum...)

curl -kO http://mirror.cc.columbia.edu/pub/softwa...80p.img.gz

sha256sum neon-pinebook-remix-useredition-20181028-1500-arm64-1080p.img.gz

cat neon-pinebook-remix-useredition-20181028-1500-arm64-1080p.img.gz | gzip -d | dd bs=24M of=/dev/mmcblk1

* remove sd card and reboot
  Reply
#9
Corkonian, 8GB is plenty for stretch minimal ...
xbcsmith, that is exactly what I meant.
You can find me on IRC, Discord and Twitter


  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Slarm64 on Pinebook [Slackware Arm - 64 bit] KRT 8 325 04-01-2020, 12:53 AM
Last Post: e-minguez
  pinebook black screen when booting with "different power mode than last used" penzoiders 10 968 03-27-2020, 02:08 AM
Last Post: mr.angeli
Information Manjaro ARM for Pinebook erchache2000 73 8,213 03-05-2020, 07:15 AM
Last Post: tophneal
  Kali Linux for the Pinebook Luke 1 215 03-03-2020, 05:01 AM
Last Post: e-minguez
  Anyway to run Teamviewer for ARM/Pinebook? Ekkaia 8 3,304 01-16-2020, 08:51 PM
Last Post: dhosh
  Pinebook is going the way of Betamax? trigger 8 737 01-06-2020, 09:57 AM
Last Post: Jeremiah Cornelius
  Pinebook Wlan Driver does not work properly matze79 2 171 12-15-2019, 02:50 AM
Last Post: matze79
  Q4OS for PINEBOOK q4osteam 89 30,053 11-12-2019, 09:17 PM
Last Post: ac8dg
  Pinebook 1080p / KDE Neon freezes every 5-10 min pyrrhumain 12 1,056 11-02-2019, 10:03 AM
Last Post: rookieone
  Are Pinebook images compatible with Pine64+? starcrescent 7 394 09-18-2019, 09:22 AM
Last Post: tophneal

Forum Jump:


Users browsing this thread: 1 Guest(s)