My "rockpro64" is different from the public circuit diagram.
#1
"ROCKPro64 Schematic v2.1 (Second Batch Production Release)"
http://files.pine64.org/doc/rockpro64/ro...21-SCH.pdf

Question 1)
In the above published circuit diagram (Sheet of "CODEC/Head phone")
"R225 = DNP,   R226 = 0R" is presented.

However, the result of examining my "rockpro64" is
"R225 = 10kΩ, R226 = DNP".

Please tell me whether this difference is due to the production lot or just the mistake of the circuit diagram.
*) I think that it is merely a mistake in the circuit diagram.


Question 2)
Connection of headphone-jack = "J16:pj_35A063" is obviously wrong.
*) I think that the top and bottom are connected in reverse.

Please introduce the datasheet of "pj_35A063" or present the correct circuit diagram.
I searched the datasheet for "pj_35A063", but I could not find it.

As for the signal name "HPGND / HPOL / HPOR", its connection relation can be inferred.
However, as for the signal name "PHONE_DET / MIC_IN 2 P",
since the specification of "pj_35A063" is unknown,
it is impossible to infer the correct connection relation.

---
My "rockpro64" is a "RAM=4GB" version, and it arrived in 2018-August.
I think that it is probably the "second batch production" lot.
  Reply
#2
(09-29-2018, 03:20 AM)t4_4t Wrote: "ROCKPro64 Schematic v2.1 (Second Batch Production Release)"
http://files.pine64.org/doc/rockpro64/ro...21-SCH.pdf

Question 1)
In the above published circuit diagram (Sheet of "CODEC/Head phone")
"R225 = DNP,   R226 = 0R" is presented.

However, the result of examining my "rockpro64" is
"R225 = 10kΩ, R226 = DNP".

Please tell me whether this difference is due to the production lot or just the mistake of the circuit diagram.
*) I think that it is merely a mistake in the circuit diagram.


Question 2)
Connection of headphone-jack = "J16:pj_35A063" is obviously wrong.
*) I think that the top and bottom are connected in reverse.

Please introduce the datasheet of "pj_35A063" or present the correct circuit diagram.
I searched the datasheet for "pj_35A063", but I could not find it.

As for the signal name "HPGND / HPOL / HPOR", its connection relation can be inferred.
However, as for the signal name "PHONE_DET / MIC_IN 2 P",
since the specification of "pj_35A063" is unknown,
it is impossible to infer the correct connection relation.

---
My "rockpro64" is a "RAM=4GB" version, and it arrived in 2018-August.
I think that it is probably the "second batch production" lot.

Your board should be second batch. The ROCKPro64 4GB and 2GB board are identical except LPDDR4 memory configuration.

Thanks your finding, I have feedback to hardware engineer.
  Reply
#3
Thanks for the reply.

The main point of this question is not looking for any mistakes.

As you may have noticed, currently All "OS-Imgae" can not output sound via "ES8316".

I judged that part of the cause of this issues was included in this part, so I asked.

To be useful to all "rockpro64-OS" developers, I expect you to get accurate answers from you.
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Number of Rockpro64 boards sold/made fentavius 1 117 09-16-2019, 10:53 AM
Last Post: tllim
Photo RockPro64 Case 2x3.5" HDDs and 2x2.5 HDDs Luke 46 16,605 09-01-2019, 09:03 PM
Last Post: Tim Jones
  Vulkan support with rockpro64 rahulsharma 2 180 08-21-2019, 10:34 PM
Last Post: rahulsharma
  rockPro64 vs Odroid-N2 kardanadm 3 545 08-15-2019, 05:33 AM
Last Post: kardanadm
  ROCKPRO64 with 10GbE NICs H.HSEL 13 2,323 08-14-2019, 01:37 PM
Last Post: igorp
  RockPro64 not coming online after reboot imapc99 5 183 08-04-2019, 01:34 AM
Last Post: imapc99
  Rockpro64 boot issues larsgn 11 776 08-01-2019, 12:12 PM
Last Post: imapc99
  the 24/48 rockpro64 cluster LMM 6 568 07-05-2019, 06:57 AM
Last Post: vincele
  Please help ROCKPro64 Review ameridroid 0 194 06-27-2019, 04:33 PM
Last Post: ameridroid
  No sound from rockpro64 audio jack. rahulsharma 1 265 06-24-2019, 05:09 AM
Last Post: rahulsharma

Forum Jump:


Users browsing this thread: 1 Guest(s)