Copper cooler for Rockpro64
#1
       
Found this copper cooler on ebay. Fits nicely except the area around the WIFI/Bluetooth card attaches so had to bend the fins a little bit. But all in all a nice passive cooler. it does have a fan that comes with it but would need connection modification. Just wanted to share this.
  Reply
#2
Pretty cool. Looks like an old GPU heatsink.
You can find me on IRC, Discord and Twitter


  Reply
#3
Question 
Is eMMC from ODROID supported?
_____________________________________________________________________________________________________________________________________________
my SOHO NAS RockPro64 4GB v2.1 / eMMC 32GB / PCIe -> 4*SATA Marvell 88SE9235 / SD-card 64 GB / NAS Casing / image Debian Stretch Minimal / Kernel 4.4.xxx ayufan
my Multimedia desktops: ASUS H310T G5500, ODROIDs -XU4, -XU3, -C2, -C1;
my trash BananaPi; RPi B, B+; ODROID-W
  Reply
#4
I believe so, that's where I got my RockPro64. I like the board but the OS is still young.
  Reply
#5
Got myself a larger heatsink which works well. Stock Pine64 30mm job weighs 62g, this thing weighs 110g so should be useful. Running cpuminer as a benchmark indicates it is: stock 30mm at 2GHz was reaching 80C after about 15 minutes and throttling, this new sink seems to be able to keep under 80C (ambient 23C) indefinitely and running RockPro at 2.1/1.5GHz.

Had to mount it on the long axis of the board to prevent interference with the PCIe card. Available all over Fleabay - I happened to get mine from this vendor with no problems.


Attached Files Thumbnail(s)
   
* ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Started Bionic minimal - now "focal", Openbox desktop for general purpose daily PC.
* PinePhone BraveHeart daily driver with Mobian
  Reply
#6
(09-29-2018, 09:01 AM)dukla2000 Wrote: Got myself a larger heatsink which works well. Stock Pine64 30mm job weighs 62g, this thing weighs 110g so should be useful. Running cpuminer as a benchmark indicates it is: stock 30mm at 2GHz was reaching 80C after about 15 minutes and throttling, this new sink seems to be able to keep under 80C (ambient 23C) indefinitely and running RockPro at 2.1/1.5GHz.

Had to mount it on the long axis of the board to prevent interference with the PCIe card. Available all over Fleabay - I happened to get mine from this vendor with no problems.

Damn, thats nice...
You can find me on IRC, Discord and Twitter


  Reply
#7
(09-29-2018, 09:01 AM)dukla2000 Wrote: Got myself a larger heatsink which works well. Stock Pine64 30mm job weighs 62g, this thing weighs 110g so should be useful. Running cpuminer as a benchmark indicates it is: stock 30mm at 2GHz was reaching 80C after about 15 minutes and throttling, this new sink seems to be able to keep under 80C (ambient 23C) indefinitely and running RockPro at 2.1/1.5GHz.

Had to mount it on the long axis of the board to prevent interference with the PCIe card. Available all over Fleabay - I happened to get mine from this vendor with no problems.

Very nice. Wonder if it's to big to work with the NAS case?
  Reply
#8
(09-29-2018, 01:40 PM)Takenover83 Wrote: Very nice. Wonder if it's to big to work with the NAS case?

With 3.5" drives there has got to be no chance. With 2.5" dunno - the tips of the heatpipes are about 115mm above the PCB.
* ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Started Bionic minimal - now "focal", Openbox desktop for general purpose daily PC.
* PinePhone BraveHeart daily driver with Mobian
  Reply
#9
(09-29-2018, 02:34 PM)dukla2000 Wrote:
(09-29-2018, 01:40 PM)Takenover83 Wrote: Very nice. Wonder if it's to big to work with the NAS case?

With 3.5" drives there has got to be no chance. With 2.5" dunno - the tips of the heatpipes are about 115mm above the PCB.

My guess should be OK with 2.5"" due to the installation may not block the heatsink placement.
  Reply
#10
(09-29-2018, 09:01 AM)dukla2000 Wrote: Got myself a larger heatsink which works well. Stock Pine64 30mm job weighs 62g, this thing weighs 110g so should be useful. Running cpuminer as a benchmark indicates it is: stock 30mm at 2GHz was reaching 80C after about 15 minutes and throttling, this new sink seems to be able to keep under 80C (ambient 23C) indefinitely and running RockPro at 2.1/1.5GHz.

Had to mount it on the long axis of the board to prevent interference with the PCIe card. Available all over Fleabay - I happened to get mine from this vendor with no problems.

What base is the board secured to? I'm assuming it's a tiered / stack-able platform?
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rockpro64 Sata Card kills itself jerry110 18 3,426 05-14-2020, 06:44 AM
Last Post: aldrick
  Cheap 4-port SATA card working with RockPro64 4Gb andyburn 3 339 04-25-2020, 11:57 AM
Last Post: andyburn
  Rockpro64 PCI-Express Issue. t4_4t 24 1,878 04-24-2020, 11:27 AM
Last Post: pgwipeout
  Questions about the ROCKPro64 1x1 Dual Band WIFI module thelabratrules 0 152 04-04-2020, 03:29 PM
Last Post: thelabratrules
  RockPro64 pcie Gpu Davidos 6 1,873 03-20-2020, 02:07 PM
Last Post: bluciano
  My RockPro64 died after 8 months diskers 18 1,613 03-10-2020, 08:43 PM
Last Post: pfeerick
  RockPro64 PCIx4 soundcard srhtpc 0 335 01-18-2020, 10:31 PM
Last Post: srhtpc
  ROCKPro64 pwm-fan inoperable resistanceisfutile 3 358 01-01-2020, 12:47 PM
Last Post: resistanceisfutile
  RockPro64 UPS for in car use nJoy. 3 622 10-23-2019, 04:05 AM
Last Post: rahulsharma
  Rockpro64 12v Lipo battery for playbox? ScrumpyJack 0 216 09-18-2019, 01:25 AM
Last Post: ScrumpyJack

Forum Jump:


Users browsing this thread: 1 Guest(s)