07-01-2019, 03:58 PM
(This post was last modified: 07-02-2019, 05:56 AM by TheSupercomputer.
Edit Reason: Edited new values
)
My Rock is running now for roughly 8 Hours, HTOP give me for CPU Time used by ats 3:09.30, thats more than 3 Minutes.
My configuration of ats is following:
Every time the temp drops below 35 degrees ats produces a spike that pushes the temp above this limit, so the fan will ramp up, settle down and ramps up again.
Instead of just topping as I would expect.
Max CPU usage of ats was 48.5% (So far what I could see with HTOP) while temp was below MIN_CONTINOUS_TERMAL_TEMP.
Because of these load spikes while every else is Idle the temp will naturally rise and if this happened ats works just fine, but as soon as the temp drops ats acts wired.
As I was in test mode (before this current start of the system) I could see, that as soon es the temp drops below the min limit ats requests really fast the temp, the terminal impressiv was scrolling, but as soon as the temp was high enough the normal working output was seen.
EDIT:
After a night in idle the CPU Time consumed by ats is now 4:13 hours, run time of the RockPro64 is now 22 Hours.
My configuration of ats is following:
Code:
MAX_CONTINOUS_TERMAL_TEMP = 60
MIN_CONTINOUS_TERMAL_TEMP = 35
MAX_PWM = 255
MIN_PWM = 30
ALWAYS_ON = true
Every time the temp drops below 35 degrees ats produces a spike that pushes the temp above this limit, so the fan will ramp up, settle down and ramps up again.
Instead of just topping as I would expect.
Max CPU usage of ats was 48.5% (So far what I could see with HTOP) while temp was below MIN_CONTINOUS_TERMAL_TEMP.
Because of these load spikes while every else is Idle the temp will naturally rise and if this happened ats works just fine, but as soon as the temp drops ats acts wired.
As I was in test mode (before this current start of the system) I could see, that as soon es the temp drops below the min limit ats requests really fast the temp, the terminal impressiv was scrolling, but as soon as the temp was high enough the normal working output was seen.
EDIT:
After a night in idle the CPU Time consumed by ats is now 4:13 hours, run time of the RockPro64 is now 22 Hours.