Tool to Control Fan - fanctl

[tuxd3v]

Oh yes 2 question I had

Code:

/sys/class/hwmon/hwmon0/pwm1 set at 100 what should I put as reset value since the tools is controling it again how to install
the latest version of the kernel

You can forget '/sys/class/hwmon/hwmon0/pwm1',
Ats controls it, you can change it manually, and ATS will adjust it internally again. 

With Relation to new Kernels, indeed, there are at least 2 facilities, without Active cooling.

• The Normal Situation,
  were temps are good, and no need for Active cooling.
  
• Its needed some action, and there are the throttling Option available.
  

The active cooling facility, should be the second option, and the Throttling situation should be the last resource.

Newer kernels have been put some work on the active cooling, for use of the fan.

In this situation I don't know if it is advisable to have ATS running, maybe they fight against each other..
But better to check, make your tests, with and without ATS.