Tool to Control Fan - fanctl

[tuxd3v]

I would have the PWM range from +35C to +55C, stop FAN < +35C, max PWM from > +55C
decrease in frequency of MCU with +62С, Shutdown > +72C

Hello,
I don't know if all Active configurations could drop temps to 35, without at least 90% plus duty cycle
It would be good to know, what temps and pwn, and also the mechanical trembling people, are observing...

In that way, we could make some assumptions, and better tune the pwn response 

Thanks for your proposal,

• It is starting now at 39C( I will ask in another thread what temps collers/fans, mechanical trembling ) people are observing...
  The Idea of 100% Duty Cycle, at 55C or 56C, seems very good, indeed.I will do some checks, and if ok, will be in next release
• The Underclock,
  I had it until v0.1.3, but then someone asked if I could drop it.I think it would be very good to be there,Because those, that put there a inferior thermal solution,or when fan breaks,Would still be able to run more heavy loads, for longer periods of time, when lowering the Clocks( the temps goes down Abruptly, and still clocks could be little.big -1.2Ghz . 1.6Ghz ).

Your suggestions and others are appreciated