OpenBSD for RockPro64
#1
Here are instructions to install OpenBSD on the RockPro64.
I take no credit for this work - just relaying it on the forum.
  If you manage to click this link you'll join in the IRC channel
  Reply
#2
What is the purpose of the step:

"So after you've finished installing, eject the SD card and write the dtb to it again from another machine: ..."
  Reply
#3
(08-13-2018, 10:33 AM)wis g Wrote: eWhat is the purpose of the step:

"So after you've finished installing, eject the SD card and write the dtb to it again from another machine: ..."

The whole OS needs the dtb, not just the installer.

Is anyone here running it?. I have tried to install it on my rockpro64 and it always goes panic when trying to fetch the images. I am using the lastest ayufan u-boot and the lastest dtb from openbsd packages and also tried various combinations including the one used in the guide.  What am I doing wrong?????  Huh
Code:
Get/Verify SHA256.sig   100% |**************************|  1453       00:00    
et/Verify bsd            0% |                          |     0       --:-- ETApanic: uvm_fault failed: ffffff8000299674
syncing disks...12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12  giving up                                
panic: pool_do_get: mbufpl free list modified: page 0xffffff8008222000; item addr 0xffffff8008222f00; offset 0x0=0x0 != 0xa105200da8500a4f
panic: pool_do_get: mbufpl free list modified: page 0xffffff8008222000; item addr 0xffffff8008222f00; offset 0x0=0x0 != 0xa105200da8500a4f
  Reply
#4
(01-13-2019, 04:30 PM)tasu1712 Wrote:
(08-13-2018, 10:33 AM)wis g Wrote: eWhat is the purpose of the step:

"So after you've finished installing, eject the SD card and write the dtb to it again from another machine: ..."

The whole OS needs the dtb, not just the installer.

Is anyone here running it?. I have tried to install it on my rockpro64 and it always goes panic when trying to fetch the images. I am using the lastest ayufan u-boot and the lastest dtb from openbsd packages and also tried various combinations including the one used in the guide.  What am I doing wrong?????  Huh
Code:
Get/Verify SHA256.sig   100% |**************************|  1453       00:00    
et/Verify bsd            0% |                          |     0       --:-- ETApanic: uvm_fault failed: ffffff8000299674
syncing disks...12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12  giving up                                
panic: pool_do_get: mbufpl free list modified: page 0xffffff8008222000; item addr 0xffffff8008222f00; offset 0x0=0x0 != 0xa105200da8500a4f
panic: pool_do_get: mbufpl free list modified: page 0xffffff8008222000; item addr 0xffffff8008222f00; offset 0x0=0x0 != 0xa105200da8500a4f

Unfortunately I am also experiencing the same problem with my RockPro64.

Quote:root on rd0a swap on rd0b dump on rd0b
WARNING: preposterous clock chip time
WARNING: CHECK AND RESET THE DATE!
ease ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/arm64 6.4 installation program.
()nstall, (U)pgrade, (A)utoinstall or (S)hell? i
tAany prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN.  You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.

eTminal type? [vt220]
Stem hostname? (short form, e.g. 'foo') foo

Aailable network interfaces are: dwge0 vlan0.
Which network interface do you wish to configure? (or 'done') [dwge0done
D domain name? (e.g. 'example.com') [my.domain]
ND nameservers? (IP address list or 'none') [none]
panic: uvm_fault failed: ffffff80002962c0)
syncing disks... done

dump to dev 17,1 not possible
rebooting...
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  NetBSD for RockPro64 Luke 0 843 08-17-2018, 03:10 AM
Last Post: Luke

Forum Jump:


Users browsing this thread: 1 Guest(s)