HOW TO - install linux on emmc without etcher or USB adapter
#5
(07-31-2018, 04:55 AM)ayufan Wrote: Well, or just boot linux, remove jumper and run `rockpro64_reset_emmc.sh` to boot-up emmc.
That is interesting, what does
echo fe330000.sdhci > /sys/bus/platform/drivers/sdhci-arasan/<un>bind
actually do?

In my case everything in dmesg seemed fine till 4s then

Code:
[    4.165757] hid-generic 0003:248A:8566.0002: input: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-fe3a0000.usb-1/input1
[   64.503086] mmc1: cqhci: timeout for tag 6
[   64.503731] mmc1: cqhci: ============ CQHCI REGISTER DUMP ===========
[   64.504662] mmc1: cqhci: Caps:      0x00000000 | Version:  0x00000510
[   64.505588] mmc1: cqhci: Config:    0x00000000 | Control:  0x00000000
[   64.506512] mmc1: cqhci: Int stat:  0x00000000 | Int enab: 0x00000000
[   64.507438] mmc1: cqhci: Int sig:   0x00000000 | Int Coal: 0x00000000
[   64.508362] mmc1: cqhci: TDL base:  0x00000000 | TDL up32: 0x00000000
[   64.509286] mmc1: cqhci: Doorbell:  0x00000000 | TCN:      0x00000000
[   64.510210] mmc1: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000
[   64.511134] mmc1: cqhci: Task clr:  0x00000000 | SSC1:     0x00011000
[   64.512058] mmc1: cqhci: SSC2:      0x00000000 | DCMD rsp: 0x00000000
[   64.512980] mmc1: cqhci: RED mask:  0xfdf9a080 | TERRI:    0x00000000
[   64.513904] mmc1: cqhci: Resp idx:  0x00000000 | Resp arg: 0x00000000
[   64.514826] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[   64.515751] mmc1: sdhci: Sys addr:  0x00000000 | Version:  0x00001002
[   64.516675] mmc1: sdhci: Blk size:  0x00007200 | Blk cnt:  0x00000000
[   64.517599] mmc1: sdhci: Argument:  0x00010000 | Trn mode: 0x00000010
[   64.518522] mmc1: sdhci: Present:   0x1fff0000 | Host ctl: 0x00000034
[   64.519447] mmc1: sdhci: Power:     0x0000000b | Blk gap:  0x00000080
[   64.520370] mmc1: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[   64.521294] mmc1: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
[   64.522218] mmc1: sdhci: Int enab:  0x02ff4000 | Sig enab: 0x02ff4000
[   64.523143] mmc1: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000000
[   64.524066] mmc1: sdhci: Caps:      0x44edc880 | Caps_1:   0x800020f7
[   64.524990] mmc1: sdhci: Cmd:       0x00000d1a | Max curr: 0x00000000
[   64.525913] mmc1: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x64201697
[   64.526836] mmc1: sdhci: Resp[2]:   0x4e436172 | Resp[3]:  0x00880103
[   64.527759] mmc1: sdhci: Host ctl2: 0x00000083
[   64.528406] mmc1: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x7f11c208
[   64.529326] mmc1: sdhci: ============================================
[   64.530325] mmc1: running CQE recovery
which more or less repeated every 60s. I had tried to install Linux kernel 4.18.0-rc5-1052-ayufan-gd1b8f36378ff on top of 0.7.9 bionic minimal and obviously got it wrong. But as the 4.18 kernel had a problem recognising the emmc I could not do a dpkg -r.
  • ROCKPro64 v2.1 2GB, 16Gb eMMC for rootfs, SX8200Pro 512GB NVMe for /home, HDMI video & sound, Bluetooth keyboard & mouse. Arch (6.1 kernel, Openbox desktop) for general purpose daily PC.
  • PinePhone Pro Explorer Edition daily driver, Tow-boot on SPI, Arch/SXMO on eMMC
  • PinePhone BraveHeart now v1.2b 3/32Gb, Tow-boot with Arch/Phosh on eMMC


Messages In This Thread
RE: HOW TO - install linux on emmc without etcher or USB adapter - by dukla2000 - 07-31-2018, 12:40 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
Video How to Install Google PlayStore NightCrawler504 2 4,211 04-08-2020, 02:20 PM
Last Post: pino88
  load root on NVMe and /boot on eMMC Vikk42 4 6,891 07-18-2019, 12:42 PM
Last Post: stuartiannaylor
Video Video and Guide to install Android to emmc no emmc to usb adapter NightCrawler504 0 2,892 04-21-2019, 07:19 PM
Last Post: NightCrawler504
Thumbs Up Tutorial[ Seagate Disks ]: Install Seagate OpenSeaChest Utilities tuxd3v 41 59,189 04-08-2019, 10:10 AM
Last Post: Neo2018

Forum Jump:


Users browsing this thread: 1 Guest(s)