PCIe -> SATA and NVMe work as of 0.6.59
#4
My NVMe drive still isn't being picked up, but neither was the PCI sata card on the first boot with mainline... so I'm going to try again and reboot a few times. Edit: It still doesn't seem to like me - either NVMe is still not completely stable, drive's faulty or not compatible, or something else.... It's a new el-cheapo M.2 2280, and does seem to do something on startup, but I get the following in dmesg and it don't work.

Code:
[    7.624204] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    7.625029] rockchip-pcie: probe of f8000000.pcie failed with error -110

In the meantime, here are some results for a random 1.5TB Seagate 'Green' drive on the PCI SATA card on mainline 4.18 ... as I had nothing but lockups, endless "ata2: hard resetting link" loops and "cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2" errors with the 4.4 kernel.

Code:
                                                             random    random     bkwd    record    stride                                    
             kB  reclen    write  rewrite    read    reread    read     write     read   rewrite      read   fwrite frewrite    fread  freread
         102400       4    27191    31454    35270    36355      662      923                                                          
         102400      16    60049    69537    62676    75448     2603     3504                                                          
         102400     512   107696   109266   114872   115728    43650    66147                                                          
         102400    1024   109415   103687   119136   119073    65168    83687                                                          
         102400   16384   105158   112524   121737   125382   111152   102903                                                          

Full iozone output and lspci output here


Messages In This Thread
PCIe -> SATA and NVMe work as of 0.6.59 - by Luke - 07-04-2018, 09:37 AM
RE: PCIe -> SATA and NVMe work as of 0.6.59 - by pfeerick - 07-05-2018, 10:39 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  WiFi not working with PCIe SSD installed mikeD 0 353 05-25-2021, 07:48 AM
Last Post: mikeD
  Power supply underpowered for Rockpro64, deficient PCIe SATA card, or something else? daffy 8 1,338 05-20-2021, 10:04 PM
Last Post: t4_4t
  Booting from NVME ilovegentoo 11 4,582 05-10-2021, 02:06 PM
Last Post: rrowles2000
  Upgrade Debian kernel on a SD/SATA drive boot combo. linuxha 6 3,420 12-12-2019, 04:43 AM
Last Post: dukla2000
  Frequent kernel panic, possibly due to PCIe SSD? meier 4 2,623 11-22-2019, 05:15 PM
Last Post: meier
  My PCIe disk controller works with Linux 5.3.6 guannais 1 1,227 10-30-2019, 07:11 PM
Last Post: guannais
Information Update 22.02.2019 Feature-complete Debian build - SDIO WiFi/BT / PCIe / 3D / 2D Luke 100 60,381 10-04-2019, 08:57 PM
Last Post: tuxd3v
  Linux distro that will work with Kodi? SBCraok 9 4,746 09-18-2019, 02:12 AM
Last Post: mtrcycllvr
  PCIe ath10k on RockPro64 dasfranky 5 2,762 08-31-2019, 11:36 AM
Last Post: tuxd3v
  PCIe Sata II adapter and ssd TRIM bavay 0 823 08-16-2019, 07:49 AM
Last Post: bavay

Forum Jump:


Users browsing this thread: 1 Guest(s)