[Aug 6] Debian Stretch Minimal 64bit (0.7.8) / Ubuntu 18.04 Bionic LXDE Desktop Image (0.7.8) / Ubuntu 18.04 Bionic minimal 64bit / 32bit Image (0.7.8) / Ubuntu 18.04 Bionic Containers Image (0.7.8) / Stretch OpenMediaVault OS Image armhf / Stretch OpenMediaVault OS Image arm64 ( 0.7.8) - ROCK64 | [June 25] Stock Android 8.1 - ROCK64 | [June 19] Armbian (5.42) - ROCK64 | [June 19] Armbian (5.38) - PINE A64(+) / PINE A64-LTS / SOPINE

Project Inspiration | Get Started | IRC Logs | Forum Rules/Policy


rock64/ubuntu start-up
#31
(06-15-2018, 12:26 PM)pas059 Wrote: Concerning the wifi, my wifi dongle is detected, but as i did not find a way to use it, i installed the package "network-manager-gnome". After that i have a icon in the taskbar but the icon has a little red cross over it. A clic on it, shows a menu in wich there is an item corresponding to my wifibox. But selecting this item do nothing; if i select the 'Edit connections...' item, a window is open showing my wifi box, but once again trying to edit these connections do nothing. Well,  probably it is necessary to install another packages, but which?

I'm running Ayufan's Bionic-LXDE 0.6.44 and had the same issue with the WiFi and tried installing "network-manager-gnome" but that didn't work. What worked for me was installing Wicd network manager "sudo apt-get install wicd", then I was able to select what wifi network to connect to, etc.  
Cheers
Reply
#32
Hi,

I did not have such line 

Code:
name resolve order = bcast host
in my smb.conf file, so i added it. Unfortunatly this change only the error message from "connection refused" to "invalid argument" Huh . So, i executed the command smbclient and i got this:
Code:
smbclient -L 192.168.1.72
WARNING: The "syslog" option is deprecated
Enter WORKGROUP\rock64's password:
Anonymous login successful

    Sharename       Type      Comment
    ---------       ----      -------
smb1cli_req_writev_submit: called for dialect[SMB2_10] server[192.168.1.72]
Error returning browse list: NT_STATUS_REVISION_MISMATCH
Reconnecting with SMB1 for workgroup listing.
Connection to 192.168.1.72 failed (Error NT_STATUS_RESOURCE_NAME_NOT_FOUND)
Failed to connect with SMB1 -- no workgroup available

thanks for your help
regards
Reply
#33
(06-27-2018, 12:36 PM)pas059 Wrote: Hi,

I did not have such line 

Code:
name resolve order = bcast host
in my smb.conf file, so i added it. Unfortunatly this change only the error message from "connection refused" to "invalid argument" Huh . So, i executed the command smbclient and i got this:
Code:
smbclient -L 192.168.1.72
WARNING: The "syslog" option is deprecated
Enter WORKGROUP\rock64's password:
Anonymous login successful

    Sharename       Type      Comment
    ---------       ----      -------
smb1cli_req_writev_submit: called for dialect[SMB2_10] server[192.168.1.72]
Error returning browse list: NT_STATUS_REVISION_MISMATCH
Reconnecting with SMB1 for workgroup listing.
Connection to 192.168.1.72 failed (Error NT_STATUS_RESOURCE_NAME_NOT_FOUND)
Failed to connect with SMB1 -- no workgroup available

thanks for your help
regards

This is starting to frustrate me as much as it is probably doing to you. I've got one last idea. In smb.conf again, add:

Code:
client min protocol = SMB2
client max protocol = SMB3


Save and restart smbd/nmbd.
Pine64.xyz IRC network operator, developer of various software bits for the Rock64.

SADIE -- Simple Android Download and Install Executable (for Rock64)
Reply
#34
Hi fire219
with SMBD2/3 as min/max protocol, now smbclient -L 192.168.1.72 gives:
Code:
    Sharename       Type      Comment
    ---------       ----      -------
smb1cli_req_writev_submit: called for dialect[SMB2_10] server[192.168.1.72]
Error returning browse list: NT_STATUS_REVISION_MISMATCH
SMB1 disabled -- no workgroup available

the errors 'NT_STATUS_REVISION_MISMATCH' is always here, i made an apt aupdate/upgrade but this change nothing for smclient. Perhaps something wrong with bionic-LXDE, but what?

regards
Reply
#35
Is "WORKGROUP\rock64" a valid user for the network shares? Maybe do the following instead (substituting your username for <WinUsername>)

smbclient -L 192.168.1.72 -U<WinUsername> 
Reply
#36
Hi,
there is a difference; $smbclient -L 192.168.1.72 -U winusername gives:
Code:
    Sharename       Type      Comment
    ---------       ----      -------
    ADMIN$          Disk      Administration �� distance
    C$              Disk      Partage par d��faut
    Documents publics Disk      
    IPC$            IPC       IPC distant
    Logiciels       Disk      
    Users           Disk      
Reconnecting with SMB1 for workgroup listing.
Connection to 192.168.1.72 failed (Error NT_STATUS_RESOURCE_NAME_NOT_FOUND)
Failed to connect with SMB1 -- no workgroup available

and if i set min/max protocol to SMB2/3 in smb.conf, this gives:
Code:
    Sharename       Type      Comment
    ---------       ----      -------
    ADMIN$          Disk      Administration �� distance
    C$              Disk      Partage par d��faut
    Documents publics Disk      
    IPC$            IPC       IPC distant
    Logiciels       Disk      
    Users           Disk      
SMB1 disabled -- no workgroup available

regards
Reply
#37
better news,

i tested the connection to the rock from a pc. To do this i added these lines
Code:
[test]
    comment = For testing only, please
    path = /export/samba
    read only = no
    guest ok = yes
to smb.conf file, and
Code:
$mkdir /export/samba/test
$chmod 777 /export/samba/test
and this works  Smile . So i suspected a problem on the PC (on windows7), so i tested with another pc (on widows 10), and this works WinkHuh . Of course, i have no problem to  connect from one pc to each other. In all cases i use my WinUsername/Password. Perhaps i have to verify some things on the win7 pc Confused 
Thanks to all of you for your helps and sorry if i made you lose time.
regards
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Linux Images (ROCK64) pineadmin 144 54,475 09-20-2018, 04:48 PM
Last Post: thewonderer
  GPU not working with Ubuntu and Debian builds kdawgpoker 9 290 09-16-2018, 11:04 AM
Last Post: zet_lab
  How fast is rock64 if a desktop? heocb 8 675 09-12-2018, 11:58 AM
Last Post: kdawgpoker
Question /dev/spidev0,0 on the Rock64 - Does anyone know how to enable it? Kappuchino 12 600 09-09-2018, 05:05 PM
Last Post: tllim
Big Grin ANNOUNCING *BETA* RELEASE OF RECALBOX FOR THE ROCK64 Mrfixit2001 50 5,162 09-06-2018, 03:48 PM
Last Post: Luke
  Newbie, Can't get Audio using Ubuntu 18.04 v0.7.9 LXDE Pajaro 4 187 09-06-2018, 03:05 PM
Last Post: Pajaro
  Rock64 - can not connect via store's USB-to-serial nor see (if) booting. jovval 5 189 09-06-2018, 07:06 AM
Last Post: jovval
Star 0.7.8 Linux release from ayufan for Rock64 Luke 20 4,383 09-05-2018, 02:54 AM
Last Post: Luke
  Rock64 USB3 bugs NitroDeath 4 601 09-02-2018, 03:00 AM
Last Post: NitroDeath
  Slackware for Rock64 RK3328 mara 42 4,816 09-01-2018, 07:27 PM
Last Post: mara

Forum Jump:


Users browsing this thread: 1 Guest(s)