ROCK64 RTC
#21
Yes it did ,,.... with a bit more to be done,

Did a fix broken after and alot was installed .... then ran through the update, upgrade, dist-upgrade ...

Don't want to reboot until that was done, i was afraid that my removing all LibEGL.* might have bad repercussions when rebooting ....
#22
I do not see any update to using a battery for RTC on newest Rock64 which was going to be utilized as an automation server combo firewall.

I have not used the Internet for time in over 15 years now and always used an NTP server with GPS / PPS. Over the years transitioned to using the PFSense box with a serial / PPS connection to a GPS which provides great time for me.

I am very particular about automation and time.

We are at the two year mark here.

Time to give up and move on.
Pete
Auto mator
#23
(02-08-2019, 07:17 AM)petec Wrote: I do not see any update to using a battery for RTC on newest Rock64 which was going to be utilized as an automation server combo firewall.

I have not used the Internet for time in over 15 years now and always used an NTP server with GPS / PPS.  Over the years transitioned to using the PFSense box with a serial / PPS connection to a GPS which provides great time for me.

I am very particular about automation and time.

We are at the two year mark here.  

Time to give up and move on.

The issue due to the availability of PoE capable magnetic LAN which has very long lead time, 16-20 weeks lead time. We will starts phase in new revision on April.
#24
I am a newbie and have a basic question. I am ordering both Rock64 and Rock64 boards and will be running a webserver on it in an environment without internet connection. Most probably the antenna will create a hotspot for the mobile devices to connect to it.
I will have to turn on and off the system almost every day. Will both the boards lose the date stamp when restarted provided the battery RTC is not there ?
Is there a way to keep the time up to date so that the browser running the webserver home page should not prompt for errors ..
Thank you
#25
(02-11-2019, 11:36 AM)waqasnasir Wrote: I am a newbie and have a basic question.  I am ordering both Rock64 and Rock64 boards and will be running a webserver on it in an environment without internet connection.  Most probably the antenna will create a hotspot for the mobile devices to connect to it.
I will have to turn on and off the system almost every day.  Will both the boards lose the date stamp when restarted provided the battery RTC is not there ?
Is there a way to keep the time up to date so that the browser running the webserver home page should not prompt for errors ..
Thank you

Just don;t unplug teh power supply if need RTC keep working.


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rock64 kernel panics clay 15 392 10-17-2021, 06:30 PM
Last Post: Rocklobster
  Pine Rock64 eMMC lifespan moonspell79 3 510 08-19-2021, 06:46 PM
Last Post: bcnaz
  Rock64 No Audio - Solved wbecks 12 17,714 08-13-2021, 01:23 PM
Last Post: blakeadam
Question Hardware issues with Rock64 grobbs 11 3,023 07-24-2021, 10:23 AM
Last Post: robinkyle11
  Trustzone support for Rock64 capablegh 1 413 07-17-2021, 10:15 AM
Last Post: capablegh
  Python GPIO Library for the Rock64 (R64.GPIO) Leapo 37 41,295 07-02-2021, 03:20 PM
Last Post: klausfelix
  rock64, compile problems "illegal instruction", "memory fault" -> ddr_333Mhz? klausfelix 0 353 07-02-2021, 03:13 PM
Last Post: klausfelix
Information Serial Console for the Rock64 MarkHaysHarris777 33 34,920 06-24-2021, 12:24 PM
Last Post: mikeklien
  lost eletronic component rock64 marvin1986 1 640 06-01-2021, 06:27 PM
Last Post: 8bit
Shocked Rock64 - Reboots after few minutes addezai 2 920 04-22-2021, 07:03 PM
Last Post: addezai

Forum Jump:


Users browsing this thread: 7 Guest(s)