How do you like the case?
Love it
50.00%
17
Like it
29.41%
10
Its not for me
20.59%
7
34 vote(s)
* You voted for this item. [Show Results]

RockPro64 Case 2x3.5" HDDs and 2x2.5 HDDs
#28
(08-13-2018, 09:30 AM)Luke Wrote: Here is what I'd check out not including HDD suggestions:

Either
https://www.pine64.org/?product=rockpro6...d-computer

or
https://www.pine64.org/?product=rockpro6...d-computer

Everything else you need:
https://www.pine64.org/?product=rockpro64-heatsink
https://www.pine64.org/?product=rockpro6...nas-casing
https://www.pine64.org/?product=rockpro6...rface-card
https://www.pine64.org/?product=rockpro6...wer-supply

Optionally eMMC:
https://www.pine64.org/?product=16gb-emmc
https://www.pine64.org/?product=usb-adap...mmc-module

80mm fan:
There currently isn't a 80mm fan in the store (there will be in the future).

If you can't find a compatible one where you live, then get any 80mm 12v 2 pin one and find Jst 2.0 Ph 2-Pin connectors. They can be obtained on the cheap where I live. Clip the existing wires and solder / or exchange the plug.

There are obviously other extras you may want to get for the future, such as the WiFi/BT module, etc. but I won't account for that as many will not find it something necessary.

80 mm fan: https://www.pine64.org/?product=fan-for-...nas-casing
I have to admit to some confusion about fans for the NAS enclosure. The 80 mm fan was recently added to the product pages and seems to have 2-pin connector. This might imply that the Rockpro64 board regulates fan speed by reducing voltage on the fan power connector. Can anybody confirm this? It also implies that only a single fan should be configured in the enclosure - no heat sink fan. Personally, I would prefer to have a pwm case fan with its own controller.

I am awaiting the arrival of my recently ordered NAS enclosure. I had ordered a midsize heat sink with a 20mm fan on top - thinking that case fan was a second fan in the enclosure, and was included with the case. Obviously, I was wrong. It would be very helpful, if the NAS enclosure product page was updated to show the parts list for a complete project.
  Reply


Messages In This Thread
RE: RockPro64 Case 2x3.5" HDDs and 2x2.5 HDDs - by whitehat - 08-24-2018, 10:10 PM
Better fan option for the NAS case - by Tim Jones - 06-26-2019, 03:33 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  RockPro64 eMMC boot euu 0 168 06-27-2020, 10:51 PM
Last Post: euu
  ROCKPro64 has Lithium Battery Port yes or no? anfast 3 175 06-25-2020, 02:09 PM
Last Post: anfast
Music Need Direction with my Rockpro64 RachelMusclegirl 4 278 06-11-2020, 12:12 PM
Last Post: Der Geist der Maschine
  Performance and Power Demand RockPro64 fotastisch 6 643 06-06-2020, 03:27 PM
Last Post: Atch
  RockPro64 so problematic! Boot issues PorterDon 1 172 06-04-2020, 12:25 PM
Last Post: dukla2000
  RockPro64 Power input m.ekstrom 0 103 05-19-2020, 03:28 AM
Last Post: m.ekstrom
  RockPro64 intermittent freezing Servingworlds 1 135 04-26-2020, 02:21 PM
Last Post: mabs
  No /dev/gpiochip[n] on RockPro64. Faradn 6 340 04-21-2020, 08:03 AM
Last Post: Faradn
  Rockpro64 Case WIP xbcsmith 0 287 01-26-2020, 05:05 PM
Last Post: xbcsmith
  Rockpro64 Case WIP xbcsmith 0 172 01-26-2020, 05:02 PM
Last Post: xbcsmith

Forum Jump:


Users browsing this thread: 1 Guest(s)