RFLink connected to /dev/ttyUSB0 not working
#9
(05-16-2018, 11:14 AM)Rocklobster Wrote: I tried ayufan's Distro originally and came up against a number of issues. I flashed Armbian Xenial from this link and it worked. Maybe you could try it and see if it works. https://www.armbian.com/rock64/

Maybe somebody with a bit more technical experience of the Rock64 boardcould chip in with some advice or hints here.


.

It might also help to tell us what other periphals are attached to your USB ports. It looks like you have some sort of conflict on your USB ports. What Arduino model do you have attached and what cable are you using for connection.

I tryed all version you gived me : ubuntu and debian. I tryed using 2 different sd card and one of them is the recommanded one on the armbian documentation page and always have had kernel issue, kernel panic messages and not even once the board booted. I also tryed using a hdd and u-boot from ayufan but I had the same panic messages.
These panic massages remid me of the errors I had when I installed Debian or Xenial given on that page.

The arduino is the only device connected to the pine (except the ssd on which is the system). The model is Arduino Mega 2560 on which I flashed this firmware.
  Reply


Messages In This Thread
RE: RFLink connected to /dev/ttyUSB0 not working - by ulysse132 - 05-17-2018, 05:51 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  How to boot an older, working kernel bits 0 126 11-01-2024, 04:43 PM
Last Post: bits
Sad Blinkind red LED and stop working randomly ? jean_bruder 1 2,061 12-12-2021, 07:35 PM
Last Post: Rocklobster
Lightbulb RK3399 Linux rtl8822cu module bluetooth not working shivarj89 0 1,608 07-29-2021, 07:19 AM
Last Post: shivarj89
  Does working *nix exist for Rock64? brox 2 4,326 12-29-2018, 09:29 AM
Last Post: brox
  GPU not working with Ubuntu and Debian builds kdawgpoker 10 15,440 12-19-2018, 03:53 PM
Last Post: va88
  Bluetooth adapter from store not working in Linux/Lakka/Retroarch Poincare 0 2,083 06-26-2018, 06:34 PM
Last Post: Poincare
  Onboard LEDs connected to the RK805-1 out1 and out2 GPIO pins prof7bit 8 7,861 03-03-2018, 02:58 PM
Last Post: prof7bit

Forum Jump:


Users browsing this thread: 1 Guest(s)