Network Speed
#18
There seems to be nothing wrong with your USB 3 drive. I think you have a valid point to suspect client side. Anyway, here is my SMB config file /etc/samba/smb.conf.

Code:
[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
  workgroup = EASTWING

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
  dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes


#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
  log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
  max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
  syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
  panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
  server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
#   passdb backend = tdbsam

#   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
#   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
#   passwd program = /usr/bin/passwd %u
#   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
#   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
  map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
  usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

#[printers]
#   comment = All Printers
#   browseable = no
#   path = /var/spool/samba
#   printable = yes
#   guest ok = no
#   read only = yes
#   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
#[print$]
#   comment = Printer Drivers
#   path = /var/lib/samba/printers
#   browseable = yes
#   read only = yes
#   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

[public]
  comment = I have no comment
  path = /public
  public = yes
  browseable = yes
  only guest = yes
  writable = yes
;   printable = no
  create mask = 0777

[public2]
  comment = I have no comment
  path = /public2
  public = yes
  browseable = yes
  only guest = yes
  writable = yes
  create mask = 0777

[public3]
  comment = I have no comment
  path = /public3
  public = yes
  browseable = no
  only guest = yes
  writable = yes
  create mask = 0777
  Reply


Messages In This Thread
Network Speed - by stuartiannaylor - 10-16-2017, 03:14 AM
RE: Network Speed - by stuartiannaylor - 10-16-2017, 07:27 AM
RE: Network Speed - by Luke - 10-16-2017, 07:54 AM
RE: Network Speed - by stuartiannaylor - 10-16-2017, 08:05 AM
RE: Network Speed - by Luke - 10-16-2017, 02:40 PM
RE: Network Speed - by stuartiannaylor - 10-16-2017, 05:22 PM
RE: Network Speed - by Luke - 10-17-2017, 02:39 AM
RE: Network Speed - by stuartiannaylor - 10-21-2017, 02:58 PM
RE: Network Speed - by freebsd - 10-22-2017, 02:36 AM
RE: Network Speed - by Luke - 10-22-2017, 12:43 AM
RE: Network Speed - by Luke - 10-22-2017, 09:20 AM
RE: Network Speed - by stuartiannaylor - 10-22-2017, 09:45 AM
RE: Network Speed - by Luke - 10-22-2017, 03:08 PM
RE: Network Speed - by rontant - 10-22-2017, 11:17 PM
RE: Network Speed - by Luke - 10-23-2017, 02:32 AM
RE: Network Speed - by rontant - 10-23-2017, 04:36 AM
RE: Network Speed - by Luke - 10-23-2017, 04:38 AM
RE: Network Speed - by rontant - 10-23-2017, 04:59 AM
RE: Network Speed - by Luke - 10-23-2017, 05:53 AM
RE: Network Speed - by stuartiannaylor - 10-23-2017, 07:22 AM
RE: Network Speed - by Luke - 10-23-2017, 08:59 AM
RE: Network Speed - by rontant - 10-23-2017, 07:07 PM
RE: Network Speed - by stuartiannaylor - 10-25-2017, 10:08 AM
RE: Network Speed - by S3phi40T - 02-11-2018, 09:27 AM
RE: Network Speed - by matteobp - 02-12-2018, 03:31 AM
RE: Network Speed - by S3phi40T - 02-12-2018, 03:45 AM
RE: Network Speed - by CrouchingDragon - 05-04-2018, 10:34 PM
RE: Network Speed - by S3phi40T - 05-06-2018, 10:07 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
Heart Best quick/easy way to control case fan speed? idillicah 4 3,335 06-24-2021, 09:14 AM
Last Post: CounterPillow
  low speed wifi pas059 4 3,436 05-13-2019, 12:09 PM
Last Post: pas059
Bug Fan speed controlled by CPU temp script mikedhoore 2 3,085 01-14-2019, 05:16 PM
Last Post: va88

Forum Jump:


Users browsing this thread: 1 Guest(s)