[June 25] Stock Android 8.1 ROCK64 | [June 19] Armbian (5.42) ROCK64 | [June 19] Armbian (5.38) PINE A64(+) / PINE A64-LTS / SOPINE | [June 19] motionEyeOS (20180224) PINE A64(+) | [June 19] Armbian (5.46) Pinebook | [June 06] Bionic LXDE (0.6.44-239) ROCK64 | Bionic Minimal (0.6.44-239) ROCK64 | [June 06] Debian Stretch Minimal (0.6.44-239) ROCK64 | [June 06] Jessie OpenMediaVault (0.6.44-239) ROCK64

Project Inspiration | Get Started | IRC Logs | Forum Rules/Policy


LibreELEC Krypton/Leia/Agile 64bit kernel 32bit libs
Hello,
hope its ok to post my problems here Big Grin

Problem 1:
I tried to install
-leia24
-some nightbuilds from test.libreelec.
They doint boot from eMMC (Red + White led lit forever and nothing happens) I only can boot them if i insert a SD-Card, Install a Jumper on eMMC "pins" and remove the jumper directly when i start.
Or if i install leia21 -> Boot -> go into a linux build -> mount the eMMC p1 and the img from the libreelec build i want and copy the Image / System files to the eMMC (replace them from the installed leia21 build)

Problem 2:
I got Inputstream.adaptive running (why is it not in all this builds ...?)
If i have hardware acceleration - PRIME active and Try to change the Source, i got a blackscreen my monitor says no signal. And i never get the image back (need to restart)
In the logs i get WARNING: CRenderManager::WaitForBuffer - timeout waiting for buffer

If i deactivate hardware acceleration, it works without any problems (only 90-100% cpu load..)

If i now reactivate hardware acceleration, the video starts playing with the settings i set before. But when i close it / it ends. Same behaviour (blackscreen and only restart helps)

Is there a solution that i can add ?
Reply
Does the Rock64 LibreELEC image from here (http://test.libreelec.tv/) work for anyone? 
I tried the one mentioned below, but after reboot it goes into kernel panic mode and a lot of HEX numbers are being displayed. 
LibreELEC-RK3328.arm-9.0-nightly-20180603-330aad4-rock64.img.gz

I would wish to get back to @Raybuntu's provided images as they worked (I still have some old images downloaded), but the docker addon can't be installed.
Anyone knows how to bring the docker addon back?
Reply
(06-04-2018, 02:20 PM)zarusz Wrote: Does the Rock64 LibreELEC image from here (http://test.libreelec.tv/) work for anyone? 
I tried the one mentioned below, but after reboot it goes into kernel panic mode and a lot of HEX numbers are being displayed. 
LibreELEC-RK3328.arm-9.0-nightly-20180603-330aad4-rock64.img.gz

https://forum.libreelec.tv/thread/12151-...#post93393

That last Nightly was a bad one.
Reply
(06-04-2018, 04:27 PM)kostaman Wrote:
(06-04-2018, 02:20 PM)zarusz Wrote: Does the Rock64 LibreELEC image from here (http://test.libreelec.tv/) work for anyone? 
I tried the one mentioned below, but after reboot it goes into kernel panic mode and a lot of HEX numbers are being displayed. 
LibreELEC-RK3328.arm-9.0-nightly-20180603-330aad4-rock64.img.gz

https://forum.libreelec.tv/thread/12151-...#post93393

That last Nightly was a bad one.

Thanks for pointing out the LE relevant topic, I was not able to find anything related. It is good that the LE Rock64 image is still being developed by Kwiboo.
Two days passed and there is no new nightly build. Do you know how often or when is the next nightly build going to arrive?
Reply
(06-05-2018, 01:28 PM)zarusz Wrote: Thanks for pointing out the LE relevant topic, I was not able to find anything related. It is good that the LE Rock64 image is still being developed by Kwiboo.
Two days passed and there is no new nightly build. Do you know how often or when is the next nightly build going to arrive?

Just keep checking in the nightly link and track test results in LE forum. The nightlies come every one to 2 days and kwiboo has lots of commits . It's a bit of a mess with Leia at the moment.
Reply
The LibreELEC work in progress are not yet in the nightly build location (http://test.libreelec.tv/). 
At this point they are made available by Kwiboo under a different location - more details in this LibreELEC post
Reply
(06-07-2018, 12:30 PM)zarusz Wrote: The LibreELEC work in progress are not yet in the nightly build location (http://test.libreelec.tv/). 
At this point they are made available by Kwiboo under a different location - more details in this LibreELEC post

Are you sure?
I see this 'LibreELEC-RK3328.arm-9.0-nightly-20180612-a0d6cb2-rock64.tar' in http://test.libreelec.tv
Reply
(06-12-2018, 07:13 PM)Wizardknight Wrote: Are you sure?
I see this 'LibreELEC-RK3328.arm-9.0-nightly-20180612-a0d6cb2-rock64.tar' in http://test.libreelec.tv

That was a Quick Test File Posted with Patches. 
Use http://kwiboo.libreelec.tv/test/
Reply
(05-14-2018, 11:51 AM)gigagames Wrote: Hello,
hope its ok to post my problems here Big Grin

Problem 1:
I tried to install
-leia24
-some nightbuilds from test.libreelec.
They doint boot from eMMC (Red + White led lit forever and nothing happens) I only can boot them if i insert a SD-Card, Install a Jumper on eMMC "pins" and remove the jumper directly when i start.
Or if i install leia21 -> Boot -> go into a linux build -> mount the eMMC p1 and the img from the libreelec build i want and copy the Image / System files to the eMMC (replace them from the installed leia21 build)

Problem 2:
I got Inputstream.adaptive running (why is it not in all this builds ...?)
If i have hardware acceleration - PRIME active and Try to change the Source, i got a blackscreen my monitor says no signal. And i never get the image back (need to restart)
In the logs i get WARNING: CRenderManager::WaitForBuffer - timeout waiting for buffer

If i deactivate hardware acceleration, it works without any problems (only 90-100% cpu load..)

If i now reactivate hardware acceleration, the video starts playing with the settings i set before. But when i close it / it ends. Same behaviour (blackscreen and only restart helps)

Is there a solution that i can add ?

I have same problem as your problem 2 on nightly-20180517-2417476, but devel-20180606204626-0267cea is OK.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Kernel Build Help frewind 25 1,169 07-15-2018, 08:35 AM
Last Post: gene83
  ayufan's kernel atlantii 0 70 07-14-2018, 09:25 AM
Last Post: atlantii
  Kwiboo's LibreELEC 18 test images Luke 11 557 07-12-2018, 09:04 AM
Last Post: gigagames
Question Installing the latest kernel (Debian Stretch) + configuring the bootloader? [email protected] 3 588 05-21-2018, 03:31 AM
Last Post: viguzzz
  Debian Stretch and Kodi Krypton on Rock64 zarusz 28 7,514 05-17-2018, 02:03 PM
Last Post: KernelPanic
  [feature request] please enable memtest in the kernel prof7bit 0 98 03-13-2018, 11:46 AM
Last Post: prof7bit
  Explore the Kernel make install secret cooker 3 279 02-27-2018, 09:16 AM
Last Post: cooker
  Error building Rock 64 kernel Bapple 3 447 02-13-2018, 08:23 AM
Last Post: xalius
  Looking for linux kernel image with mptcp support (multipath-tcp) or LEDE (openWrt) xslite 0 231 01-21-2018, 11:45 AM
Last Post: xslite
  I can not build a Wifi driver in the kernel pine3228 3 225 01-06-2018, 11:17 AM
Last Post: xalius

Forum Jump:


Users browsing this thread: 1 Guest(s)