linux boot error
#1
i cant boot with linux in rock64, i just format with pine installer, im using toshiba exceria 16gb, android works but linux dont   Huh

error output:

mmcblk1: error -84 sending status command, retrying
mmcblk1: error -84 sending status command, aborting
mmcblk1: error -84 sending status command, retrying
mmcblk1: error -84 sending status command, aborting
mmcblk1: error -84 sending status command, retrying
mmcblk1: error -84 sending status command, aborting
mmcblk1: error -84 sending status command, retrying
mmcblk1: error -84 sending status command, aborting


sd card tested with f3


Attached Files Thumbnail(s)
                   
  Reply
#2
(09-05-2017, 08:32 AM)jerson Wrote: i cant boot with linux in rock64, i just format with pine installer, im using toshiba exceria 16gb, android works but linux dont   Huh

...

You need to provide ayufan with the boot log captured with another computer connected to the Rock64 as described in the forum Hardware & Accessories category. The photos you sent aren't adequate. See:
"How to Setup Serial Console Cable Over the Rock64 SBC"
In minicom you will need to capture boot data into minicom.cap file.
Once in minicom, use Cntrl-A Z, then select L to:
        Turn Capture file on off. If turned on, all output sent to the screen will be captured in the file too.
In Ubuntu (Linux), the minicom.cap file should appear in your user home directory.
Send the minicom.cap file to ayufan.

Hope this helps.
  Reply
#3
+1, got same problem with all aufyan builds. SD Sony 16GB

Any news about this thread?

Also tried armbian and debian lxde image.
Rock64 started only with android imageSad
  Reply
#4
you might want to try the last release version rather than the latest build. also, there are a couple of other ways to write the image, there is pine installer, etcher, and if windows machine win32diskimage if you have ubuntu you can use the disks program, i think. so my advice is to format with sd card format program and then try an image program until you find one that works for your setup. there have been 2 programs i've used most of the time the past 17 months, i format the card with sd card format and write with win32diskimage when using my windows laptop and if on my ubuntu laptop i use etcher. the only utility i have ever had issues with is that piece of junk from allwiner, i can not remember the name, but if you have been around for a year or longer you may know the one i'm talking about and i have never used the pine installer.
  Reply
#5
Have you tested your SD card using H2testw 1.4 or F3 ? 
You can find me on IRC, Discord and Twitter


  Reply
#6
I had the same problem with toshiba 32GB, I traded it with a friend for old 16GBs card and it worked.
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Alpine Linux isndw 12 9,427 08-12-2021, 05:41 PM
Last Post: pix
Lightbulb RK3399 Linux rtl8822cu module bluetooth not working shivarj89 0 153 07-29-2021, 07:19 AM
Last Post: shivarj89
Information Linux Mainline ayufan 63 51,523 05-14-2021, 10:41 AM
Last Post: Wizzard
  Setting a MAC on Rock64 U-Boot kiriakos 2 1,032 03-23-2021, 04:51 AM
Last Post: kiriakos
  Linux Images (ROCK64) pineadmin 164 164,331 02-12-2021, 10:14 AM
Last Post: useful64
  Boot from USB 3.0 with hub Turbo 0 711 12-20-2020, 02:24 PM
Last Post: Turbo
  Linux laptop does not detect the board when plugged in via USB soupy 0 1,514 10-07-2020, 02:51 PM
Last Post: soupy
  Arch Linux Arm --> Kernel 5.8 breaks installation as365n4 12 5,449 08-31-2020, 01:41 AM
Last Post: as365n4
  Arch Linux ARM on the Rock64 V3 justinweiss 2 2,265 08-24-2020, 05:16 PM
Last Post: justinweiss
  Arch Linux Arm - external RTC problem max 1 1,254 08-17-2020, 10:35 AM
Last Post: max

Forum Jump:


Users browsing this thread: 1 Guest(s)