Archlinux (mainline) for Pinebook
#41
alankao, That's strange. Well, I've tried Arch on my 1080p Pinebook (not a manually downloaded image, though). You can choose Arch from installer's dropdown menu, and it booted and worked fine.
  Reply
#42
The u-boot included with that image doesn't work for some of the pinebooks. You can try to flash a newer one.

Enviado desde mi ONEPLUS A5010 mediante Tapatalk
  Reply
#43
(11-29-2018, 12:19 AM)UltraBloxX Wrote: alankao, That's strange. Well, I've tried Arch on my 1080p Pinebook (not a manually downloaded image, though). You can choose Arch from installer's dropdown menu, and it booted and worked fine.

Hi UltraBloxX,

Thanks for sharing your experience.  I did flash it from the installer.
Now I suspect that a 128G micro SD might be too large for the booting process,
so I will try a smaller one instead.

BTW, is it true that the first boot takes more than 10 minutes?

Thanks!
  Reply
#44
Just in case, and while the u-boot is still old, you can use the following workaround (in my case, flashing the microsd):
  • Flash the image:
Code:
dd if=./archlinux-xfce-pinebook-20181104.img of=/dev/sdb bs=4M oflag=direct status=progress
  • Flash an updated u-boot:
Code:
dd if=./u-boot-sunxi-with-spl-pinebook.bin of=/dev/sdb bs=8k seek=1

I'm using @gamiee updated u-boot (I've attached here just in case)

NOTE: I've added the pdf extension to the u-boot file otherwise I couldn't attach it to the post.

HTH!


Attached Files
.pdf   u-boot-sunxi-with-spl-pinebook.bin.pdf (Size: 604.14 KB / Downloads: 35)
  Reply
#45
Anarsoul's Arch has been upgraded to 4.20
  If you manage to click this link you'll join in the IRC channel
  Reply
#46
Heart 
I'm currently very happy and wanted to thank Anarsoul & all of you for your work - I used the SD card image to boot up my Pinebook 1080p today and used it to pacstrap Arch Linux to the eMMC with my specific needs (encrypted LVM, LXQt).

By peeking at what Anarsoul's scripts do when creating an image & combining that with my AMD64 Arch installation experience, it was very simple.

Now I finally have a system exactly the way I like it (especially I can put sensitive stuff on it now because I don't have to fear to forget the Pinebook somewhere anymore).

So really, thank you very much.

I was a little bit worried about the speed drop due to the encryption, but it's barely noticeable.
  Reply
#47
(01-20-2019, 12:05 PM)Blutkoete Wrote: I'm currently very happy and wanted to thank Anarsoul & all of you for your work - I used the SD card image to boot up my Pinebook 1080p today and used it to pacstrap Arch Linux to the eMMC with my specific needs (encrypted LVM, LXQt).

By peeking at what Anarsoul's scripts do when creating an image & combining that with my AMD64 Arch installation experience, it was very simple.

Now I finally have a system exactly the way I like it (especially I can put sensitive stuff on it now because I don't have to fear to forget the Pinebook somewhere anymore).

So really, thank you very much.

I was a little bit worried about the speed drop due to the encryption, but it's barely noticeable.

Would you mind to write up a guide or something? I think it would be really helpful for folks with little arch experience Smile

Thanks!
  Reply
#48
(02-02-2019, 06:32 AM)e-minguez Wrote:
(01-20-2019, 12:05 PM)Blutkoete Wrote: I'm currently very happy and wanted to thank Anarsoul & all of you for your work - I used the SD card image to boot up my Pinebook 1080p today and used it to pacstrap Arch Linux to the eMMC with my specific needs (encrypted LVM, LXQt).

By peeking at what Anarsoul's scripts do when creating an image & combining that with my AMD64 Arch installation experience, it was very simple.

Now I finally have a system exactly the way I like it (especially I can put sensitive stuff on it now because I don't have to fear to forget the Pinebook somewhere anymore).

So really, thank you very much.

I was a little bit worried about the speed drop due to the encryption, but it's barely noticeable.

Would you mind to write up a guide or something? I think it would be really helpful for folks with little arch experience Smile

Thanks!

Sorry for the delay: https://forum.pine64.org/showthread.php?tid=7173
  Reply
#49
So great! Thanks!

Enviado desde mi ONEPLUS A5010 mediante Tapatalk
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Information Manjaro ARM for Pinebook erchache2000 40 1,583 05-24-2019, 04:49 AM
Last Post: trigger
  pinebook black screen when booting with "different power mode than last used" penzoiders 7 225 05-20-2019, 02:46 AM
Last Post: penzoiders
  Wifi I/F on Pinebook 11.6" eblot 2 251 05-19-2019, 04:53 PM
Last Post: Shoananas
  KDE Neon Pinebook remix edition RC image bshah 67 19,042 05-18-2019, 11:44 AM
Last Post: rookieone
  Q4OS for PINEBOOK q4osteam 86 22,731 04-23-2019, 02:09 AM
Last Post: pineadmin
  Netrunner 18.03 Idolon for the Pinebook shadeslayer 92 11,926 04-21-2019, 11:37 AM
Last Post: cuvtixo
  Armbian - Xenial Desktop (Pinebook) pineadmin 79 14,584 03-06-2019, 04:20 PM
Last Post: tllim
  How can I reliably get battery status on pinebook tillea 4 1,032 03-05-2019, 06:43 AM
Last Post: chessie
Rainbow Customised (encrypted) eMMC installation using Anarsoul's ArchLinux Blutkoete 6 629 03-05-2019, 04:06 AM
Last Post: e-minguez
  No display options on Pinebook or Pineboard Fox7799 0 192 02-06-2019, 11:56 AM
Last Post: Fox7799

Forum Jump:


Users browsing this thread: 1 Guest(s)