Got your PINE64 board yet? Post here!

[Artyom]

Finally is shipping now, it's in Chicago now in my tracking right now.

---

I have Pine64 developers edition. I install radiators...

Отправлено с моего SM-T325 через Tapatalk

---

62 C degrees temperature on SOC when viewing full HD movie. I note as I believe it is necessary, I do not use thermal glue.
If you use thermal glue, remember that its thermal conductivity is worse than that of the thermal paste.

If you want I can post instructions on how to stick to the radiators Pine64 with using the thermal paste and super glue. But it should be done carefully, and take good radiators (preferably copper) as they remove the problematic back)))
Отправлено с моего SM-T325 через Tapatalk

Hi Artyom, Why didn't you put a heatsink on the A64 ARM CPU? Copper or Alu heatsinks ? The colour also have en impact on the thermal resistance. Black is better to radiate heat than blank surfaces. The voltage regulator next to the micro USB connector might also benefit a added heatsink. (only a suggestion. I'm a April backer and haven't got my Pine A64 jet)

Hey can you post instructions how to do it?

Well, of course. But there will be some delay. I was glued to the existing radiator in my board. As soon as the remaining will come my board, I'll do the instructions with pictures. and explanations, okay?