Got your PINE64 board yet? Post here!
#21
anyone from US received their boards? Mine has been stuck at ISC NEW YORK NY(USPS) since March 12.
#22
(03-15-2016, 07:07 PM)lzto Wrote: anyone from US received their boards? Mine has been stuck at ISC NEW YORK NY(USPS) since March 12.

Mine too.
#23
(03-15-2016, 10:31 AM)ppiixx Wrote:
(03-15-2016, 10:08 AM)tllim Wrote:
(03-15-2016, 07:47 AM)ppiixx Wrote: Mine arrived today. Packaging seems very poor. The box is badly dented and the board appears to be slightly curved!

Hard to get a good picture of the board and it does appear to boot ok but might want to consider better packaging for the next batch.


[Image: FfTolj1.jpg]
Sorry to know on the shipping condition. If the board is damage, we will compensate with another new board. There are several suggestions on this thread and we already take notes to improve. However, we have compared our shipping material with others such like Raspberry Pi and CHIP, and believed we have provide more protection than them.

I've got the board booting into linux ok (using the image from https://github.com/apritzel/pine64) so it isn't dead but there is a visible rise of several mm from one end of the board to the other which doesn't look right.

[Image: 3i3hXvS.jpg]

The support form at http://www.pine64.com/support isn't working:

'Failed to send your ticket. Please try later or contact the administrator by another method.'


I regret that the board is in this state ... Prompt please, on the front and the back sidethere are any traces of mechanical action?
#24
Got mine this afternoon. Mine is more or less in the same shape as @ppiixx. Board is bent, box was damaged in transit. Mine is booting Android, but it repeatedly crashes even with a 2.1A/5v power supply (short cable) and Sandisk 16GB. Tried burning the SD image multiple times with PhoenixCard. I'm fairly dissatisfied/not impressed so far..

[Image: 1wlQHZ4l.jpg]

[Image: mxXw165l.jpg]

[Image: rdrJU0Cl.jpg]
#25
(03-15-2016, 11:29 PM)minutesgrep Wrote: Got mine this afternoon. Mine is more or less in the same shape as @ppiixx. Board is bent, box was damaged in transit. Mine is booting Android, but it repeatedly crashes even with a 2.1A/5v power supply (short cable) and Sandisk 16GB. Tried burning the SD image multiple times with PhoenixCard. I'm fairly dissatisfied/not impressed so far..

[Image: 1wlQHZ4l.jpg]

[Image: mxXw165l.jpg]

[Image: rdrJU0Cl.jpg]
Apply for a new one, you are on your right. I'll totally do it if after 1 month delay if I receive a damaged box or bended board.
#26
if only the box, it does not matter
#27
(03-16-2016, 01:51 AM)hazerty Wrote: if only the box, it does not matter
The real thing comes when the own board is bended as you see.
#28
Smile Smile Smile Smile
is not wrong...
#29
(03-15-2016, 11:29 PM)minutesgrep Wrote: Got mine this afternoon. Mine is more or less in the same shape as @ppiixx. Board is bent, box was damaged in transit. Mine is booting Android, but it repeatedly crashes even with a 2.1A/5v power supply (short cable) and Sandisk 16GB. Tried burning the SD image multiple times with PhoenixCard. I'm fairly dissatisfied/not impressed so far..

[Image: 1wlQHZ4l.jpg]

[Image: mxXw165l.jpg]

[Image: rdrJU0Cl.jpg]

Good afternoon, prompt, whether there is on Board (along the curve) traces of mechanical influence (for example behind a protective coating from the Board and so on)? I just want to understand how such a curve can be obtained during transportation are not seriously damaging the outer layer of the Board. I have a serious suspicion that the problem is not in the service delivery and in the plant. You can take foto of the board (front and rear side) and post the photos?
#30
Doesn't look promising... Sad


Possibly Related Threads…
Thread Author Replies Views Last Post
Question Is the PinePhone delivered to your door or to a post office? MirceaKitsune 11 7,142 11-22-2021, 11:58 AM
Last Post: zetabeta
  Didn't receive phone, no response from Pine64 at all rn43x 8 9,545 09-11-2021, 01:29 PM
Last Post: hacker
  New to Pine64: should I have expected a tracking number by now? Indieshack 2 5,015 06-19-2020, 03:44 PM
Last Post: Indieshack
  Earth to Pine64, please respond! EvanBeem 43 48,883 02-01-2017, 09:26 PM
Last Post: tllim
  BEFORE You post asking about shipping from Pine Store (not Kickstarter) rahlquist 41 79,359 10-13-2016, 03:56 PM
Last Post: hans
  Pine64 sales are useless panoflex 1 3,796 09-22-2016, 06:06 PM
Last Post: pfeerick
  Pine64 2gb + stuff for sale or trade Caleb420 0 2,433 09-22-2016, 01:46 AM
Last Post: Caleb420
  Not Received Any Pine64 maheshsutariya 16 21,018 09-14-2016, 06:15 PM
Last Post: tllim
  PINE64 ABS Playbox Enclosure be available for sale in the shop danlcarr 3 5,767 08-31-2016, 09:28 PM
Last Post: clocey
  Pine64 FS or Trade? birdcatx7 6 9,192 08-29-2016, 01:53 PM
Last Post: MarkHaysHarris777

Forum Jump:


Users browsing this thread: 5 Guest(s)