(ARCHIVED) Ubuntu Xenial Image (BSP Kernel)

[hhbarnes]

I've got a problem I hope someone can help me out with.

Over the weekend I successfully installed the latest build on 4 of my new Pine64+ with 2GB and they were working great. My intent is to run these as headless servers so I restarted them without the HDMI cable. Unfortunately every one of the boards stalled during the reboot and wouldn't come online. When I plugged the cable back in each started up without issue.

I'm a bit of a noob in this are and am still learning the ropes so please bear with me. Do I need to add an entry into the uenv.txt file to allow the board to ignore the missing HDMI cable during the initial boot or is there something else going on?

Thanks,
Harry

My Pines boot with and without HDMI cable.

Awesome, unfortunately all four of mine don't. With that said, I do have a fifth one built with the OpenHab image that boots fine without HDMI. It looks like that is based off this image.


Sent from my iPhone using Tapatalk

Check your router page and see if the Pines that you have shows up in the list of devices that is connected to the router, if it shows up, your Pines are working perfectly, you just need to set up ssh on your Pines to access them.

They don't. The Ethernet plug never links up with the switch and the activity indicators never begin blinking.


Sent from my iPhone using Tapatalk