03-10-2016, 05:47 PM
The "PINE64 Z-Wave Module (AU version)" already added at the Backerkit list, please make this selection.
... TL Lim
... TL Lim
Australia/New Zealand Z-Wave module
|
03-10-2016, 05:47 PM
The "PINE64 Z-Wave Module (AU version)" already added at the Backerkit list, please make this selection.
... TL Lim
03-12-2016, 06:16 PM
(03-10-2016, 05:47 PM)tllim Wrote: The "PINE64 Z-Wave Module (AU version)" already added at the Backerkit list, please make this selection. Thanks again for this. Just FYI: the title and frequency are correct, but the description for the BackerKit item mentions "Europe" so might put some people off.
03-12-2016, 10:48 PM
(03-12-2016, 06:16 PM)Crispin Wrote:(03-10-2016, 05:47 PM)tllim Wrote: The "PINE64 Z-Wave Module (AU version)" already added at the Backerkit list, please make this selection. I edit from Europe version and seems like not fully edited. Thanks on point out the mistake and I will correct tomorrow when back in office.
03-18-2016, 05:17 PM
I would require the NZ/AU version of Z Wave. don't mind paying a little extra for it.
A version that violates local transmission rules is completely NO use to me !! I have received about 10 "backerkit survey" requests. But none have the AU option listed.
03-18-2016, 05:45 PM
(03-18-2016, 05:17 PM)mist42nz Wrote: I would require the NZ/AU version of Z Wave. don't mind paying a little extra for it. Hi there - the item is certainly on my BackerKit, have you scrolled down far enough? This is the page - https://pine64.backerkit.com/backer/addons - and here is what it looks like... ![]()
03-20-2016, 06:00 PM
(03-18-2016, 05:45 PM)Crispin Wrote:(03-18-2016, 05:17 PM)mist42nz Wrote: I would require the NZ/AU version of Z Wave. don't mind paying a little extra for it. Could you please confirm how we are supposed to add this to our order without adding to our costs? I've backed the IoT package which means the z-wave board is included but my survey only has US and EU z-wave board options. I can see the AU option in the backerkit addon page however this suggests that I would need to pay an additional US$30 to get AU supported z-wave.
03-20-2016, 08:26 PM
(03-20-2016, 06:00 PM)zadok Wrote:If your address is Australia and New Zealand, we will ship out AU version.(03-18-2016, 05:45 PM)Crispin Wrote:(03-18-2016, 05:17 PM)mist42nz Wrote: I would require the NZ/AU version of Z Wave. don't mind paying a little extra for it.
03-20-2016, 08:32 PM
(03-20-2016, 08:26 PM)tllim Wrote:(03-20-2016, 06:00 PM)zadok Wrote:If your address is Australia and New Zealand, we will ship out AU version.(03-18-2016, 05:45 PM)Crispin Wrote:(03-18-2016, 05:17 PM)mist42nz Wrote: I would require the NZ/AU version of Z Wave. don't mind paying a little extra for it. Great, thanks.
03-23-2016, 06:09 PM
This was not available before my backer kit was locked. Can I still get it at kickstarter pricing??
03-23-2016, 07:04 PM
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
![]() |
Z-Wave module pinout to make it compatible with Pi b+ | ebretteville | 59 | 91,658 |
07-12-2019, 08:55 AM Last Post: kris240376 |
![]() |
Z-Wave and openzwave+node-openzwave-shared | saro | 2 | 6,676 |
09-01-2017, 05:22 AM Last Post: saro |
Z-Wave - Full and Low Power Inclusion mode | B34N | 1 | 4,575 |
03-26-2017, 06:03 PM Last Post: B34N |
|
KICAD Quick Lib and Module Generator | mbt28 | 1 | 5,003 |
02-12-2017, 10:45 PM Last Post: tllim |
|
Z Wave Module and still using GPIO | bang | 2 | 6,179 |
01-16-2017, 03:12 AM Last Post: bang |
|
Z-Wave US module with adapter | aegrotatio | 4 | 7,834 |
01-08-2017, 12:03 AM Last Post: aegrotatio |
|
RaZberry Module (z-wave) need support to get it working! | Luxus | 13 | 20,562 |
11-03-2016, 02:04 AM Last Post: Luxus |
|
Z-Wave module problem | vintagewaffle | 0 | 2,516 |
10-26-2016, 10:50 AM Last Post: vintagewaffle |
|
[EU] Z-Wave module tutorials? | meowbot | 2 | 5,713 |
09-13-2016, 07:54 PM Last Post: Ghost |
|
New module: POT board | Crispin | 25 | 43,571 |
07-12-2016, 08:47 PM Last Post: khgoh |