09-13-2016, 12:00 PM
(This post was last modified: 09-13-2016, 12:45 PM by MarkHaysHarris777.)
(09-13-2016, 11:47 AM)martinayotte Wrote: Hey, guys !
Trying to help in this thread, http://forum.pine64.org/showthread.php?t...5#pid19735, even if I don't own any of those ZWave board, I feel that there is a potential conflict with the debug console on /dev/ttyS0.
Are any of you owning this board got it successfully working ?
Did you had to turn off the debug console in the /boot/boot.scr ?
martinayotte, it depends if you're using the z-wave module for the euler bus (which is in conflict with the serial console on uart0) or whether your z-wave module is running on the PI bus (which is using uart2 and not in conflict with the serial console).
The serial console must be disabled in order to use uart0 (ttyS0) on the euler bus.
marcushh777 
please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )
please join us for a chat @ irc.pine64.xyz:6667 or ssl irc.pine64.xyz:6697
( I regret that I am not able to respond to personal messages; let's meet on irc! )
