StarPro64 Irradium (based on crux linux) riscv64, aarch64
#21
installation README.TXT
kernel 6.18.33

mirror 1, mirror 2, mirror 3, mirror 4, mirror 5

irradium-3.8-riscv64-core-starpro64-6.18.33-build-20260527.img.zst
irradium-3.8-riscv64-core-starpro64-6.18.33-build-20260527.img.zst.sha256
irradium-3.8-riscv64-xfce-starpro64-6.18.33-build-20260527.img.zst
irradium-3.8-riscv64-xfce-starpro64-6.18.33-build-20260527.img.zst.sha256
donation   irradium

  Reply
#22
installation README.TXT
kernel 6.6.141

mirror 1, mirror 2, mirror 3, mirror 4, mirror 5

irradium-3.8-riscv64-core-starpro64-6.6.141-build-20260528.img.zst
irradium-3.8-riscv64-core-starpro64-6.6.141-build-20260528.img.zst.sha256
irradium-3.8-riscv64-xfce-starpro64-6.6.141-build-20260528.img.zst
irradium-3.8-riscv64-xfce-starpro64-6.6.141-build-20260528.img.zst.sha256
donation   irradium

  Reply
#23
installation README.TXT
kernel 6.6.144

mirror 1, mirror 2, mirror 3, mirror 4, mirror 5

irradium-3.8-riscv64-core-starpro64-6.6.144-build-20260717.img.zst
irradium-3.8-riscv64-core-starpro64-6.6.144-build-20260717.img.zst.sha256
irradium-3.8-riscv64-xfce-starpro64-6.6.144-build-20260717.img.zst
irradium-3.8-riscv64-xfce-starpro64-6.6.144-build-20260717.img.zst.sha256

installation README.TXT
kernel 7.2.0-rc3

mirror 1, mirror 2, mirror 3, mirror 4, mirror 5

irradium-3.8-riscv64-core-starpro64-7.2.0-rc3-build-20260717.img.zst
irradium-3.8-riscv64-core-starpro64-7.2.0-rc3-build-20260717.img.zst.sha256
irradium-3.8-riscv64-xfce-starpro64-7.2.0-rc3-build-20260717.img.zst
irradium-3.8-riscv64-xfce-starpro64-7.2.0-rc3-build-20260717.img.zst.sha256

Code:
[    0.000000] Booting Linux on hartid 3
[    0.000000] Linux version 7.2.0-rc3 (root@irradium) (riscv64-unknown-linux-gnu-gcc (crosstool-NG 1.26.0) 13.2.0, GNU ld (crosstool-NG 1.26.0) 2.40) #1 SMP PREEMPT_DYNAMIC Fri Jul 17 22:54:03 UTC 2026
[    0.000000] Machine model: Pine64 StarPro64
[    0.000000] SBI specification v0.3 detected
[    0.000000] SBI implementation ID=0x1 Version=0x10000
[    0.000000] SBI TIME extension detected
[    0.000000] SBI IPI extension detected
[    0.000000] SBI RFENCE extension detected
[    0.000000] SBI SRST extension detected
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x00000002dfe00000, size 512 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x00000002dfe00000..0x00000002ffdfffff (524288 KiB) map reusable linux,cma
[    0.000000] OF: reserved mem: 0x00000000dfff0000..0x00000000dfffffff (64 KiB) nomap non-reusable lpcpures@dfff0000
[    0.000000] OF: reserved mem: 0x00000000e0000000..0x00000000e1ffffff (32768 KiB) nomap non-reusable region@e0000000
[    0.000000] OF: reserved mem: 0x0000001000000000..0x00000010003fffff (4096 KiB) map non-reusable mmode_resv1@10,0
[    0.000000] OF: reserved mem: 0x0000000080000000..0x000000008007ffff (512 KiB) map non-reusable mmode_resv0@80000000
[    0.000000] OF: reserved mem: 0x0000000059000000..0x00000000593fffff (4096 KiB) nomap non-reusable sprammemory@59000000
[    0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable lpcpu@a0000000
[    0.000000] OF: reserved mem: 0x00000000fffff000..0x00000000ffffffff (4 KiB) nomap non-reusable g2d_4GB_boundary_reserved_4k
[    0.000000] OF: reserved mem: 0x00000001fffff000..0x00000001ffffffff (4 KiB) nomap non-reusable g2d_8GB_boundary_reserved_4k
[    0.000000] OF: reserved mem: 0x00000002fffff000..0x00000002ffffffff (4 KiB) nomap non-reusable g2d_12GB_boundary_reserved_4k
[    0.000000] OF: reserved mem: 0x0000000300000000..0x000000047fffffff (6291456 KiB) nomap non-reusable mmz_nid_0_part_0
[    0.000000] SBI HSM extension detected
[    0.000000] Using physical memory alias for noncached mappings
[    0.000000] riscv: base ISA extensions acdfhim
[    0.000000] riscv: ELF capabilities acdfim
[    0.000000] Ticket spinlock: enabled
[    0.000000] Zone ranges:
[    0.000000]  DMA32    [mem 0x0000000059000000-0x00000000ffffffff]
[    0.000000]  Normal  [mem 0x0000000100000000-0x000000087fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]  node  0: [mem 0x0000000059000000-0x00000000593fffff]
[    0.000000]  node  0: [mem 0x0000000080000000-0x000000009fffffff]
[    0.000000]  node  0: [mem 0x00000000a0000000-0x00000000a00fffff]
[    0.000000]  node  0: [mem 0x00000000a0100000-0x00000000dffeffff]
[    0.000000]  node  0: [mem 0x00000000dfff0000-0x00000000e1ffffff]
[    0.000000]  node  0: [mem 0x00000000e2000000-0x00000000ffffefff]
[    0.000000]  node  0: [mem 0x00000000fffff000-0x00000000ffffffff]
[    0.000000]  node  0: [mem 0x0000000100000000-0x00000001ffffefff]
[    0.000000]  node  0: [mem 0x00000001fffff000-0x00000001ffffffff]
[    0.000000]  node  0: [mem 0x0000000200000000-0x00000002ffffefff]
[    0.000000]  node  0: [mem 0x00000002fffff000-0x000000047fffffff]
[    0.000000]  node  0: [mem 0x0000000480000000-0x000000087fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000059000000-0x000000087fffffff]
[    0.000000] On node 0, zone DMA32: 4096 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 27648 pages in unavailable ranges
[    0.000000] percpu: Embedded 54 pages/cpu s97368 r8192 d115624 u221184
[    0.000000] pcpu-alloc: s97368 r8192 d115624 u221184 alloc=54*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Kernel command line: root=UUID=32539e08-a5c0-4084-9f32-0932043d95e3 ro rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty1 consoleblank=0 loglevel=4 earlycon=sbi clk_ignore_unused usb-storage.quirks= rootdelay=2  clk_ignore_unused
[    0.000000] printk: log buffer data + meta data: 262144 + 1114112 = 1376256 bytes
[    0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8389632
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Dynamic Preempt: full
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.000000] Trampoline variant of Tasks RCU enabled.
[    0.000000] Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] riscv-intc: 64 local interrupts mapped
[    0.000000] riscv: providing IPIs using SBI IPI extension
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
[    0.000002] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns
[    0.000940] Console: colour dummy device 80x25
[    0.000961] printk: legacy console [tty1] enabled
[    0.001122] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000)
[    0.001139] pid_max: default: 32768 minimum: 301
[    0.004514] landlock: Up and running.
[    0.004526] Yama: becoming mindful.
[    0.005019] AppArmor: AppArmor initialized
[    0.006714] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.006801] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.008217] VFS: Finished mounting rootfs on nullfs
[    0.014629] ASID allocator disabled (0 bits)
[    0.014981] rcu: Hierarchical SRCU implementation.
[    0.014992] rcu: Max phase no-delay instances is 1000.
[    0.015510] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.016298] EFI services will not be available.
[    0.017143] smp: Bringing up secondary CPUs ...
[    0.021599] smp: Brought up 1 node, 4 CPUs
[    0.021982] Memory: 25984528K/33558528K available (13703K kernel code, 8735K rwdata, 8192K rodata, 6410K init, 1283K bss, 7042076K reserved, 524288K cma-reserved)
[    0.027311] devtmpfs: initialized
[    0.044252] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.044308] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[    0.052299] DMI: not present or invalid.
[    0.054359] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.055222] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.055295] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.055398] audit: initializing netlink subsys (disabled)
[    0.055773] audit: type=2000 audit(0.052:1): state=initialized audit_enabled=0 res=1
[    0.056435] thermal_sys: Registered thermal governor 'fair_share'
[    0.056448] thermal_sys: Registered thermal governor 'bang_bang'
[    0.056454] thermal_sys: Registered thermal governor 'step_wise'
[    0.056458] thermal_sys: Registered thermal governor 'user_space'
[    0.056463] thermal_sys: Registered thermal governor 'power_allocator'
[    0.056613] cpuidle: using governor ladder
[    0.056686] cpuidle: using governor menu
[    0.057293] CCACHE: 4 banks, 16 ways, sets/bank=1024, bytes/block=64
[    0.057307] CCACHE: Index of the largest way enabled: 15
[    0.065987] /soc/i2c@50950000/es8388-0@10: Fixed dependency cycle(s) with /soc/i2s1@50210000
[    0.066371] /soc/i2s0@50200000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    0.066390] /soc/i2s1@50210000: Fixed dependency cycle(s) with /soc/i2c@50950000/es8388-0@10
[    0.066418] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    0.066429] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/es_wb
[    0.066442] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/mipi_dsi@50270000
[    0.066475] /soc/es_wb: Fixed dependency cycle(s) with /soc/display_control@502c0000
[    0.066500] /soc/mipi_dsi@50270000: Fixed dependency cycle(s) with /soc/display_control@502c0000
[    0.066521] /soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/i2s0@50200000
[    0.066538] /soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/display_control@502c0000
[    0.066617] /soc/csidma@0x52048000: Fixed dependency cycle(s) with /soc/csi2@51050000
[    0.066639] /soc/csi2@51050000: Fixed dependency cycle(s) with /soc/csidma@0x52048000
[    0.135450] /soc/i2c@50950000/es8388-0@10: Fixed dependency cycle(s) with /soc/i2s1@50210000
[    0.136936] eswin-pinctrl 51600080.pinctrl: eswin pinctrl initialized
[    0.138597] /soc/i2s0@50200000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    0.138755] /soc/i2c@50950000/es8388-0@10: Fixed dependency cycle(s) with /soc/i2s1@50210000
[    0.138796] /soc/i2s1@50210000: Fixed dependency cycle(s) with /soc/i2c@50950000/es8388-0@10
[    0.139122] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    0.139135] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/es_wb
[    0.139147] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/mipi_dsi@50270000
[    0.139320] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/es_wb
[    0.139360] /soc/es_wb: Fixed dependency cycle(s) with /soc/display_control@502c0000
[    0.139532] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/mipi_dsi@50270000
[    0.139573] /soc/mipi_dsi@50270000: Fixed dependency cycle(s) with /soc/display_control@502c0000
[    0.139774] /soc/display_control@502c0000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    0.139841] /soc/i2s0@50200000: Fixed dependency cycle(s) with /soc/hdmi@502a0000
[    0.139878] /soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/i2s0@50200000
[    0.139916] /soc/hdmi@502a0000: Fixed dependency cycle(s) with /soc/display_control@502c0000
[    0.141286] /soc/csidma@0x52048000: Fixed dependency cycle(s) with /soc/csi2@51050000
[    0.141413] /soc/csidma@0x52048000: Fixed dependency cycle(s) with /soc/csi2@51050000
[    0.141466] /soc/csi2@51050000: Fixed dependency cycle(s) with /soc/csidma@0x52048000
[    0.149758] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.149766] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.149772] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.149776] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.159996] iommu: Default domain type: Translated
[    0.160003] iommu: DMA domain TLB invalidation policy: strict mode
[    0.160736] SCSI subsystem initialized
[    0.160833] libata version 3.00 loaded.
[    0.160996] usbcore: registered new interface driver usbfs
[    0.161020] usbcore: registered new interface driver hub
[    0.161040] usbcore: registered new device driver usb
[    0.161087] pps_core: LinuxPPS API ver. 1 registered
[    0.161092] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.161102] PTP clock support registered
[    0.161139] EDAC MC: Ver: 3.0.0
[    0.162287] NetLabel: Initializing
[    0.162293] NetLabel:  domain hash size = 128
[    0.162298] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.162340] NetLabel:  unlabeled traffic allowed by default
[    0.162603] mctp: management component transport protocol core
[    0.162609] NET: Registered PF_MCTP protocol family
[    0.162737] vgaarb: loaded
[    0.162946] clocksource: Switched to clocksource riscv_clocksource
[    0.165488] VFS: Disk quotas dquot_6.6.0
[    0.165618] VFS: Dquot-cache hash table entries: 512 (4096 bytes)
[    0.166736] AppArmor: AppArmor Filesystem Enabled
[    0.173879] NET: Registered PF_INET protocol family
[    0.174281] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.186327] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.186423] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.186456] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.187249] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.188140] TCP: Hash tables configured (established 262144 bind 65536)
[    0.188547] MPTCP token hash table entries: 32768 (order: 8, 786432 bytes, linear)
[    0.188810] UDP hash table entries: 16384 (order: 8, 1048576 bytes, linear)
[    0.189452] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.189488] NET: Registered PF_XDP protocol family
[    0.189508] PCI: CLS 0 bytes, default 64
[    0.189617] kvm [1]: hypervisor extension available
[    0.189623] kvm [1]: highest G-stage page table mode is Sv48x4
[    0.189628] kvm [1]: VMID 0 bits available
[    0.189833] Trying to unpack rootfs image as initramfs...
[    0.194552] Initialise system trusted keyrings
[    0.194634] Key type blacklist registered
[    0.194806] workingset: timestamp_bits=46 (anon: 41) max_order=23 bucket_order=0 (anon: 0)
[    0.205658] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.208419] fuse: init (API version 7.45)
[    0.209147] integrity: Platform Keyring initialized
[    0.209185] integrity: Machine keyring initialized
[    0.248486] Key type asymmetric registered
[    0.248496] Asymmetric key parser 'x509' registered
[    0.248727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.248897] io scheduler mq-deadline registered
[    0.250416] riscv-plic: interrupt-controller@c000000: mapped 521 interrupts with 4 handlers for 8 contexts.
[    0.251446] ledtrig-cpu: registered to indicate activity on CPUs
[    0.252635] eswin-pcie 54000000.pcie: host bridge /soc/pcie@0x54000000 ranges:
[    0.252667] eswin-pcie 54000000.pcie:      IO 0x0040800000..0x0040ffffff -> 0x0040800000
[    0.252688] eswin-pcie 54000000.pcie:      MEM 0x0041000000..0x004fffffff -> 0x0041000000
[    0.252700] eswin-pcie 54000000.pcie:      MEM 0x8000000000..0x81ffffffff -> 0x8000000000
[    0.367060] eswin-pcie 54000000.pcie: iATU: unroll T, 8 ob, 4 ib, align 4K, limit 8G
[    0.445872] Freeing initrd memory: 9144K
[    0.566962] eswin-pcie 54000000.pcie: PCIe Gen.3 x4 link up
[    0.567792] eswin-pcie 54000000.pcie: PCI host bridge to bus 0000:00
[    0.567805] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.567814] pci_bus 0000:00: root bus resource [io  0x0000-0x7fffff] (bus address [0x40800000-0x40ffffff])
[    0.567821] pci_bus 0000:00: root bus resource [mem 0x41000000-0x4fffffff]
[    0.567827] pci_bus 0000:00: root bus resource [mem 0x8000000000-0x81ffffffff pref]
[    0.567877] pci 0000:00:00.0: [1fe1:2030] type 01 class 0x060400 PCIe Root Port
[    0.567895] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x07ffffff]
[    0.567902] pci 0000:00:00.0: BAR 1 [mem 0x00000000-0x000fffff]
[    0.567909] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.567918] pci 0000:00:00.0:  bridge window [io  0x0000-0x0fff]
[    0.567924] pci 0000:00:00.0:  bridge window [mem 0x00000000-0x000fffff]
[    0.567934] pci 0000:00:00.0:  bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    0.567993] pci 0000:00:00.0: supports D1 D2
[    0.567999] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.571223] pci 0000:01:00.0: [1cc1:8201] type 00 class 0x010802 PCIe Endpoint
[    0.571333] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    0.571364] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512)
[    0.571377] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 256)
[    0.578965] pci 0000:01:00.0: ASPM: default states L1
[    0.579015] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.579052] pci 0000:00:00.0: BAR 0 [mem 0x48000000-0x4fffffff]: assigned
[    0.579062] pci 0000:00:00.0: BAR 1 [mem 0x41000000-0x410fffff]: assigned
[    0.579069] pci 0000:00:00.0: bridge window [mem 0x41100000-0x411fffff]: assigned
[    0.579078] pci 0000:01:00.0: BAR 0 [mem 0x41100000-0x41103fff 64bit]: assigned
[    0.579086] pci 0000:01:00.0: BAR 0: error updating (0x41100004 != 0xffffffff)
[    0.579101] fbcon: Taking over console
[    0.579135] pci 0000:01:00.0: BAR 0: error updating (high 0x00000000 != 0xffffffff)
[    0.579148] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.579155] pci 0000:00:00.0:  bridge window [mem 0x41100000-0x411fffff]
[    0.579164] pci_bus 0000:00: resource 4 [io  0x0000-0x7fffff]
[    0.579170] pci_bus 0000:00: resource 5 [mem 0x41000000-0x4fffffff]
[    0.579176] pci_bus 0000:00: resource 6 [mem 0x8000000000-0x81ffffffff pref]
[    0.579182] pci_bus 0000:01: resource 1 [mem 0x41100000-0x411fffff]
[    0.579672] pcieport 0000:00:00.0: PME: Signaling with IRQ 13
[    0.579933] pcieport 0000:00:00.0: AER: enabled with IRQ 13
[    0.581725] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.583280] printk: legacy console [ttyS0] disabled
[    0.603564] 50900000.serial: ttyS0 at MMIO 0x50900000 (irq = 14, base_baud = 12500000) is a 16550A
[    0.603609] printk: legacy console [ttyS0] enabled
[    0.639466] 50910000.serial: ttyS1 at MMIO 0x50910000 (irq = 15, base_baud = 12500000) is a 16550A
[    0.660110] 50920000.serial: ttyS2 at MMIO 0x50920000 (irq = 16, base_baud = 12500000) is a 16550A
[    0.666958] loop: module loaded
[    0.667549] SCSI Media Changer driver v0.25
[    0.668250] tun: Universal TUN/TAP device driver, 1.6
[    0.668374] PPP generic driver version 2.4.2
[    0.668819] dwc3-generic-plat soc:usb0@50480000: missing memory resource
[    0.678165] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.678182] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    0.678582] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000808000000010
[    0.678611] xhci-hcd xhci-hcd.0.auto: irq 17, io mem 0x50480000
[    0.678731] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.678741] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    0.678750] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    0.678913] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.02
[    0.678923] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.678929] usb usb1: Product: xHCI Host Controller
[    0.678935] usb usb1: Manufacturer: Linux 7.2.0-rc3 xhci-hcd
[    0.678956] usb usb1: SerialNumber: xhci-hcd.0.auto
[    0.679296] hub 1-0:1.0: USB hub found
[    0.679350] hub 1-0:1.0: 1 port detected
[    0.679635] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.679716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.02
[    0.679725] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.679731] usb usb2: Product: xHCI Host Controller
[    0.679737] usb usb2: Manufacturer: Linux 7.2.0-rc3 xhci-hcd
[    0.679742] usb usb2: SerialNumber: xhci-hcd.0.auto
[    0.680015] hub 2-0:1.0: USB hub found
[    0.680037] hub 2-0:1.0: 1 port detected
[    0.680380] usbcore: registered new interface driver uas
[    0.680449] usbcore: registered new interface driver usb-storage
[    0.680478] usbcore: registered new interface driver ums-alauda
[    0.680505] usbcore: registered new interface driver ums-cypress
[    0.680548] usbcore: registered new interface driver ums-datafab
[    0.680576] usbcore: registered new interface driver ums_eneub6250
[    0.680602] usbcore: registered new interface driver ums-freecom
[    0.680644] usbcore: registered new interface driver ums-isd200
[    0.680672] usbcore: registered new interface driver ums-jumpshot
[    0.680698] usbcore: registered new interface driver ums-karma
[    0.680724] usbcore: registered new interface driver ums-onetouch
[    0.680751] usbcore: registered new interface driver ums-realtek
[    0.680777] usbcore: registered new interface driver ums-sddr09
[    0.680804] usbcore: registered new interface driver ums-sddr55
[    0.680846] usbcore: registered new interface driver ums-usbat
[    0.681027] mousedev: PS/2 mouse device common for all mice
[    0.681036] i2c_dev: i2c /dev entries driver
[    0.681200] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    0.681318] device-mapper: uevent: version 1.0.3
[    0.681519] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    0.681612] EDAC DEVICE0: Giving out device to module Sifive ECC Manager controller sifive_edac.0: DEV sifive_edac.0 (INTERRUPT)
[    0.683561] riscv-pmu-sbi: SBI PMU extension is available
[    0.683596] riscv-pmu-sbi: 15 firmware and 6 hardware counters
[    0.686349] drop_monitor: Initializing network drop monitor service
[    0.687244] NET: Registered PF_INET6 protocol family
[    0.688236] Segment Routing with IPv6
[    0.688265] In-situ OAM (IOAM) with IPv6
[    0.688322] NET: Registered PF_PACKET protocol family
[    0.688406] Key type dns_resolver registered
[    0.706159] cpu0: scalar unaligned word access speed is 0.00x byte access speed (slow)
[    0.706166] cpu1: scalar unaligned word access speed is 0.00x byte access speed (slow)
[    0.706169] cpu3: scalar unaligned word access speed is 0.00x byte access speed (slow)
[    0.706173] cpu2: scalar unaligned word access speed is 0.00x byte access speed (slow)
[    0.710864] registered taskstats version 1
[    0.711704] Loading compiled-in X.509 certificates
[    0.712921] Loaded X.509 cert 'Build time autogenerated kernel key: 15a8b74936898510ca5af0403a4a80ba6fccc350'
[    0.726694] Key type .fscrypt registered
[    0.726704] Key type fscrypt-provisioning registered
[    0.746951] mmc0: SDHCI controller on 50450000.mmc [50450000.mmc] using ADMA 64-bit
[    0.750145] Key type encrypted registered
[    0.750155] AppArmor: AppArmor sha256 policy hashing enabled
[    0.750165] ima: No TPM chip found, activating TPM-bypass!
[    0.750181] Loading compiled-in module X.509 certificates
[    0.751224] Loaded X.509 cert 'Build time autogenerated kernel key: 15a8b74936898510ca5af0403a4a80ba6fccc350'
[    0.751232] ima: Allocated hash algorithm: sha256
[    0.751288] ima: No architecture policies found
[    0.751330] evm: Initialising EVM extended attributes:
[    0.751334] evm: security.selinux
[    0.751338] evm: security.SMACK64
[    0.751341] evm: security.SMACK64EXEC
[    0.751345] evm: security.SMACK64TRANSMUTE
[    0.751349] evm: security.SMACK64MMAP
[    0.751352] evm: security.apparmor
[    0.751356] evm: security.ima
[    0.751359] evm: security.capability
[    0.751363] evm: HMAC attrs: 0x1
[    0.769483] clk: Not disabling unused clocks
[    0.810954] mmc2: SDHCI controller on 50470000.mmc [50470000.mmc] using ADMA 64-bit
[    0.810960] mmc1: SDHCI controller on 50460000.mmc [50460000.mmc] using ADMA 64-bit
[    0.814514] Freeing unused kernel image (initmem) memory: 6408K
[    0.821884] Checked W+X mappings: passed, no W+X pages found
[    0.821924] Run /init as init process
[    0.821928]  with arguments:
[    0.821933]    /init
[    0.821936]  with environment:
[    0.821940]    HOME=/
[    0.821944]    TERM=linux
[    0.834140] udevd[100]: starting version 3.2.14
[    0.897640] mmc1: new UHS-I speed SDR104 SDXC card at address 5048
[    0.898051] mmcblk1: mmc1:5048 SD64G 58.0 GiB
[    0.903320]  mmcblk1: p1 p2
[    0.927382] mmc0: Failed to initialize a non-removable card
[    0.991351] mmc2: Failed to initialize a non-removable card
[    6.658953] random: crng init done
[    6.662596] udevd[106]: starting eudev-3.2.14
[    6.664389] udevd[110]: failed to execute '/usr/sbin/nfsrahead' '/usr/sbin/nfsrahead 179:0': No such file or directory
[    8.823490] EXT4-fs (mmcblk1p2): mounted filesystem 32539e08-a5c0-4084-9f32-0932043d95e3 ro without journal. Quota mode: none.
[    8.831400] raid6: using intx1 recovery algorithm
[    8.898944] raid6: int64x1  gen()  2753 MB/s
[    8.966951] raid6: int64x2  gen()  3146 MB/s
[    9.034942] raid6: int64x4  gen()  3058 MB/s
[    9.102947] raid6: int64x8  gen()  2107 MB/s
[    9.102951] raid6: using algorithm int64x2 gen() 3146 MB/s
[    9.170945] raid6: .... xor() 1674 MB/s, rmw enabled
[    9.180921] xor: measuring software checksum speed
[    9.181504]    32regs          :  5705 MB/sec
[    9.182078]    8regs          :  5786 MB/sec
[    9.182082] xor: using function: 8regs (5786 MB/sec)
[    9.333645] Btrfs loaded, zoned=yes, fsverity=yes
[    9.658655] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[  10.979583] ------------[ cut here ]------------
[  10.979590] WARNING: kernel/irq/manage.c:1502 at __setup_irq+0x40a/0x6d6, CPU#3: kworker/u16:4/94
[  10.979601] Modules linked in: xfs btrfs xor libblake2b raid6_pq
[  10.979618] CPU: 3 UID: 0 PID: 94 Comm: kworker/u16:4 Not tainted 7.2.0-rc3 #1 PREEMPT(full)
[  10.979623] Hardware name: Pine64 StarPro64 (DT)
[  10.979626] Workqueue: events_unbound deferred_probe_work_func
[  10.979640] epc : __setup_irq+0x40a/0x6d6
[  10.979644]  ra : __setup_irq+0x30/0x6d6
[  10.979647] epc : ffffffff800dd51c ra : ffffffff800dd142 sp : ffff8f8000a93980
[  10.979650]  gp : ffffffff82299c20 tp : ffffaf80a8c95a00 t0 : ffffaf80a87f2700
[  10.979653]  t1 : 0000000000000000 t2 : 0000000000000000 s0 : ffff8f8000a939e0
[  10.979656]  s1 : ffffaf80a7a6ca00 a0 : 0000000000000001 a1 : 0000000000000000
[  10.979659]  a2 : 0000000000000000 a3 : 0000000000000400 a4 : 0000000000000000
[  10.979662]  a5 : 0000000000002004 a6 : 0000000000000000 a7 : e219567d37232e33
[  10.979665]  s2 : ffffaf80a87f2680 s3 : 000000000000001a s4 : 0000000000000000
[  10.979668]  s5 : 0000000000000000 s6 : ffffaf80a7beba80 s7 : 0000000000002004
[  10.979671]  s8 : ffffaf80a7a6ca30 s9 : ffffaf80a7a6ca00 s10: 0000000000000000
[  10.979674]  s11: 0000000000000000 t3 : 0000000000000000 t4 : 0000000000000000
[  10.979677]  t5 : 0000000000000000 t6 : 0000000000000000 ssp : 0000000000000000
[  10.979680] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003
[  10.979683] [<ffffffff800dd51c>] __setup_irq+0x40a/0x6d6
[  10.979688] [<ffffffff800dd8e0>] request_threaded_irq+0xf8/0x1b0
[  10.979692] [<ffffffff800e0bb8>] devm_request_threaded_irq+0x60/0xec
[  10.979700] [<ffffffff80a3d986>] eswin_fan_control_probe+0x162/0x3c8
[  10.979707] [<ffffffff80889356>] platform_probe+0x46/0x7e
[  10.979713] [<ffffffff8088628c>] really_probe+0x8c/0x394
[  10.979720] [<ffffffff80886604>] __driver_probe_device+0x70/0x162
[  10.979726] [<ffffffff808867be>] driver_probe_device+0x30/0x9e
[  10.979732] [<ffffffff808868a8>] __device_attach_driver+0x7c/0x104
[  10.979737] [<ffffffff80883ed8>] bus_for_each_drv+0x66/0xc6
[  10.979742] [<ffffffff80886c92>] __device_attach+0x84/0x178
[  10.979748] [<ffffffff80886f6c>] device_initial_probe+0x46/0x48
[  10.979754] [<ffffffff80884f24>] bus_probe_device+0x24/0x84
[  10.979759] [<ffffffff808855e2>] deferred_probe_work_func+0x90/0xfe
[  10.979764] [<ffffffff80078426>] process_one_work+0x122/0x390
[  10.979777] [<ffffffff80078d1e>] worker_thread+0x132/0x282
[  10.979783] [<ffffffff800809b8>] kthread+0xde/0x100
[  10.979793] [<ffffffff800156b0>] ret_from_fork_kernel+0x1a/0x23c
[  10.979805] [<ffffffff80d63cfa>] ret_from_fork_kernel_asm+0x16/0x18
[  10.979815] ---[ end trace 0000000000000000 ]---
[  10.979848] eswin_fan_control_driver 50b50000.fan_control: Failed to request pwm device: -517
[  10.988465] platform 51800000.spi: deferred probe pending: platform: wait for supplier /soc/gpio@51600000/gpio-port@3
[  10.988474] platform soc:usb1@50490000: deferred probe pending: platform: wait for supplier /soc/gpio@51600000/gpio-port@1
[  10.988479] platform 50b50000.fan_control: deferred probe pending: (reason unknown)
[  13.930335] udevd[161]: starting version 3.2.14
[  13.991373] udevd[162]: starting eudev-3.2.14
[  14.107271] dw_axi_dmac_platform 50430000.dma-controller-hsp: probe with driver dw_axi_dmac_platform failed with error -2
[  14.112864] eswin_fan_control_driver 50b50000.fan_control: state.period: 100000 state.duty_cycle: 99609
[  14.113982] hwmon hwmon0: temp1_input not attached to any thermal zone
[  14.115718] hwmon hwmon1: temp1_input not attached to any thermal zone
[  14.118402] dw_axi_dmac_platform 518c0000.dma-controller-aon: probe with driver dw_axi_dmac_platform failed with error -2
[  14.118510] eswin_fan_control_driver 50b50000.fan_control: eswin fan control init done
[  14.125307] eswin-rtc 51818000.rtc: registered as rtc0
[  14.125315] eswin-rtc 51818000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0)
[  14.176381] eswin-bootspi 51800000.spi: ssi_max_xfer_size=32
[  14.176596] eswin-bootspi 51800000.spi: fifo_len 256, polling mode.
[  14.176732] dwc3-generic-plat soc:usb1@50490000: missing memory resource
[  14.185021] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[  14.185038] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[  14.185456] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe45 hci version 0x110 quirks 0x0000808000000010
[  14.185490] xhci-hcd xhci-hcd.2.auto: irq 62, io mem 0x50490000
[  14.185579] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[  14.185587] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[  14.185595] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[  14.185709] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.02
[  14.185717] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  14.185723] usb usb3: Product: xHCI Host Controller
[  14.185727] usb usb3: Manufacturer: Linux 7.2.0-rc3 xhci-hcd
[  14.185732] usb usb3: SerialNumber: xhci-hcd.2.auto
[  14.186683] hub 3-0:1.0: USB hub found
[  14.186725] hub 3-0:1.0: 1 port detected
[  14.187141] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[  14.187210] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.02
[  14.187217] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  14.187222] usb usb4: Product: xHCI Host Controller
[  14.187227] usb usb4: Manufacturer: Linux 7.2.0-rc3 xhci-hcd
[  14.187231] usb usb4: SerialNumber: xhci-hcd.2.auto
[  14.187475] hub 4-0:1.0: USB hub found
[  14.187494] hub 4-0:1.0: 1 port detected
[  14.215769] eic7700-eth-dwmac 50400000.ethernet: Deprecated MDIO bus assumption used
[  14.215794] OF: /soc/ethernet@50400000/stmmac-axi-config: Read of boolean property 'snps,lpi_en' with a value.
[  14.215826] eic7700-eth-dwmac 50400000.ethernet: PTP uses main clock
[  14.216116] eic7700-eth-dwmac 50400000.ethernet: User ID: 0x10, Synopsys ID: 0x52
[  14.216125] eic7700-eth-dwmac 50400000.ethernet: DWMAC4/5
[  14.216132] eic7700-eth-dwmac 50400000.ethernet: DMA HW capability register supported
[  14.216137] eic7700-eth-dwmac 50400000.ethernet: Active PHY interface: RGMII (1)
[  14.216142] eic7700-eth-dwmac 50400000.ethernet: RX Checksum Offload Engine supported
[  14.216147] eic7700-eth-dwmac 50400000.ethernet: TX Checksum insertion supported
[  14.216151] eic7700-eth-dwmac 50400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[  14.216157] eic7700-eth-dwmac 50400000.ethernet: Enabled L3L4 Flow TC (entries=4)
[  14.216162] eic7700-eth-dwmac 50400000.ethernet: Enabled RFS Flow TC (entries=10)
[  14.216167] eic7700-eth-dwmac 50400000.ethernet: platform requests unsupported TSO
[  14.216173] eic7700-eth-dwmac 50400000.ethernet: Using 48/48 bits DMA host/device width
[  14.234121] nvme 0000:01:00.0: of_irq_parse_pci: failed with rc=134
[  14.241261] nvme nvme0: pci function 0000:01:00.0
[  14.241274] nvme 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
[  14.250459] nvme 0000:01:00.0: error -ENODEV: probe failed
[  14.435047] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[  14.477514] YT8531 Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[  14.478359] eic7700-eth-dwmac 50410000.ethernet: Deprecated MDIO bus assumption used
[  14.478393] OF: /soc/ethernet@50410000/stmmac-axi-config: Read of boolean property 'snps,lpi_en' with a value.
[  14.478427] eic7700-eth-dwmac 50410000.ethernet: PTP uses main clock
[  14.478642] eic7700-eth-dwmac 50410000.ethernet: User ID: 0x10, Synopsys ID: 0x52
[  14.478650] eic7700-eth-dwmac 50410000.ethernet: DWMAC4/5
[  14.478656] eic7700-eth-dwmac 50410000.ethernet: DMA HW capability register supported
[  14.478661] eic7700-eth-dwmac 50410000.ethernet: Active PHY interface: RGMII (1)
[  14.478666] eic7700-eth-dwmac 50410000.ethernet: RX Checksum Offload Engine supported
[  14.478670] eic7700-eth-dwmac 50410000.ethernet: TX Checksum insertion supported
[  14.478675] eic7700-eth-dwmac 50410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[  14.478683] eic7700-eth-dwmac 50410000.ethernet: device MAC address 96:78:e6:73:cc:e0
[  14.478689] eic7700-eth-dwmac 50410000.ethernet: Enabled L3L4 Flow TC (entries=4)
[  14.478694] eic7700-eth-dwmac 50410000.ethernet: Enabled RFS Flow TC (entries=10)
[  14.478699] eic7700-eth-dwmac 50410000.ethernet: platform requests unsupported TSO
[  14.478704] eic7700-eth-dwmac 50410000.ethernet: Using 48/48 bits DMA host/device width
[  14.576085] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[  14.576098] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  14.576104] usb 3-1: Product: USB2.0 Hub
[  14.633851] hub 3-1:1.0: USB hub found
[  14.634098] hub 3-1:1.0: 4 ports detected
[  14.700896] YT8531 Gigabit Ethernet stmmac-1:00: attached PHY driver (mii_bus:phy_addr=stmmac-1:00, irq=POLL)
[  14.761174] EXT4-fs: Remounting file system with no journal so ignoring journalled data option
[  14.779902] EXT4-fs (mmcblk1p2): re-mounted 32539e08-a5c0-4084-9f32-0932043d95e3 r/w.
[  14.816034] EXT4-fs (mmcblk1p1): mounted filesystem 5c205338-1b02-4bc9-a396-dc0fe556357f r/w with ordered data mode. Quota mode: none.
[  14.828357] Adding 131068k swap on /swap.  Priority:5 extents:2 across:139260k SS
[  14.918973] usb 3-1.3: new high-speed USB device number 3 using xhci-hcd
[  15.011344] usb 3-1.3: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10
[  15.011359] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  15.011365] usb 3-1.3: Product: USB3.0 802.11ac 1200M Adapter
[  15.011370] usb 3-1.3: Manufacturer: Realtek
[  15.011374] usb 3-1.3: SerialNumber: 123456
[  15.175137] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  15.175801] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  15.176121] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[  15.182951] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
[  15.182968] cfg80211: failed to load regulatory.db
donation   irradium

  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Star64 Irradium (based on crux linux) riscv64, aarch64 mara 20 17,926 07-18-2026, 06:16 PM
Last Post: mara
  Running Linux on Pinebook Pro with External Monitor Twers1962 2 2,960 03-25-2025, 11:10 PM
Last Post: Dendrocalamus64
  linux-headers and quartz64-post-install package conflicts Berzerkleyfan 2 4,365 12-01-2023, 05:17 AM
Last Post: Berzerkleyfan
  Star64 JH7110 (slarm64, riscv64) mara 2 4,648 10-09-2023, 03:43 AM
Last Post: mara
  qemu-system-aarch64 11b2p508 1 5,190 07-19-2018, 10:26 PM
Last Post: shizzle411
  Linux Headers jedichewbacca 5 13,463 02-28-2018, 10:35 PM
Last Post: evilbunny
Information Installing Node.js from source on Arch Linux faddah 1 12,203 09-15-2017, 06:45 AM
Last Post: carlonsins
  Mini-Tutorial to get a linux Desktop GUI working on Pine64+ speedro86 15 37,740 04-05-2017, 01:45 PM
Last Post: speedro86
  Linux laptop rusty377 2 6,917 11-27-2016, 08:52 PM
Last Post: pfeerick
  why are there different images based on sd card size? checktravis 2 7,398 07-28-2016, 08:41 AM
Last Post: xalius

Forum Jump:


Users browsing this thread: 1 Guest(s)