OpenBSD install on eMMC without serial
#1
Good day everyone,

I just purchased a new RockPro64 + official aluminium case + 128GB eMMC flash + rtc battery holder but the mistake I made is that I did not know in advance to order an usb serial console or an usb adapter for eMMC.

Now the big challange is to install OpenBSD into eMMC flash without these.
I connected the device to my computer(windows 10) USB port using usb A to RockPro64 USB c OTG port and after installing windows driver assistant I can successfully see it successfully detected with AndroidTool_Release_v2.38 in Maskrom mode.

I am thinking that this might help to flash OpenBSD required files and install it to eMMC card without having a physical serial console.

I downloaded already from OpenBSD official link(https://cdn.openbsd.org/pub/OpenBSD/7.5/...s/aarch64/) the required files:
the bootloader binaries named: u-boot-aarch64 and and dtb binary packages
from u-boot-aarch64-2021.10p10.tgz:
- idbloader.img
- u-boot.itb
- u-boot-rockchip.bin
and from dtb-6.5.tgz
- rk3399-rockpro64-v2.dtb

And of course I downloaded OpenBSD img file.

Your help would be really appreciated if you can provide me some tips on how should I flash these without serial, only using AndroidTool_Release_v2.38 downloaded from https://wiki.pine64.org/wiki/ROCKPro64_S...e_Releases , Miscellaneous tools section.
  Reply
#2
You shouldn't need a serial connection.  You can prepare a bootable micro-sd card.  Boot from that first.

Have you seen this? https://github.com/jasperla/openbsd-rockpro64

I run NetBSD and I don't have any experience with OpenBSD.  But I think installation would be similar.  I made a bootable micro-sd and then copied the first part of that to eMMC and then installed NetBSD.

I used NetBSD for the micro-SD (and you could too, since the pre-built images are so easy to use).  But you could use Linux or anything else, too. Then install OpenBSD to the eMMC.
:wq



[ SRA accepts you ]

Everyone wants me to quit using NetBSD
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  DC LED light stays on after DC power removed if serial cable is attached tpaul 0 1,176 04-15-2023, 02:11 PM
Last Post: tpaul
  OpenBSD booting from SATA StickyPine 2 3,711 06-28-2021, 07:01 AM
Last Post: StickyPine
Exclamation BSD host of issues on reboot from fresh install MNtinkerer 29 28,650 06-24-2021, 08:46 AM
Last Post: MNtinkerer
  OpenBSD for RockPro64 Luke 10 20,503 10-04-2020, 04:18 AM
Last Post: zer0sig

Forum Jump:


Users browsing this thread: 1 Guest(s)