08-03-2016, 02:05 AM
(08-02-2016, 09:51 AM)MarkHaysHarris777 Wrote: First, make sure that you are using this power supply from MCM.
Second, if you're powering on with the power switch make sure that the battery is plugged in or you WILL get the same results you are describing.
Third, only use the Android LCD image . None of the other images support the LCD display.
Visit us live on the chat for tips, tricks, and live assistance... lots of great guys eager to help you.
Thanks for the response. Do you have a link to the power supply?
I haven't attached the power switch to the board so I'm just turning it on using the switch on the wall power outlet. I don't have a battery...do I need one?
I used the Android LCD image. Also in case it was the LCD pulling too much power for my power supply I detatched the LCD and tried both android image that isn't specfgically for the LCD screen and also the Debian image both showed the same although I didn't have a display connected to the HDMI. I assume the power light should still not go off even if you don't have a display connected...