06-28-2023, 07:55 PM
Following the directions from the wiki page to connect to the UART adapter, I run into trouble as I don't see a /dev/ttyUSB0 on my system.
But that's mostly fine, as I was able to connect to an external display with the HDMI.
I flashed the factory image (no trouble booting from the SD card) and powered it off.
Restarting and disconnecting the external display... there is still nothing on the Pinetab's screen.
Ah well. At least I can see some things now, I can look for logs.
But that's mostly fine, as I was able to connect to an external display with the HDMI.
I flashed the factory image (no trouble booting from the SD card) and powered it off.
Restarting and disconnecting the external display... there is still nothing on the Pinetab's screen.
Ah well. At least I can see some things now, I can look for logs.