Pine64 2gb first boot

[Ghost]

Problem solved, It was related with the display resolution, too low for the Pine64.
Thanx mates

I like to continue this thread, bc I have similar/same issues.

My first image (which was shipped) worked not with my display, with my Samsung TV I got only the start screan for about 40min.
Then I tried out several images with display and without display. nothing worked.
If I connect my display, the power led is blinking; with the TV it is lights the hole time.

Any suggestions?

Thanks

What is the make and model of your display? Does it use HDMI, DVI, VGA? Or are you saying your display IS the Samsung TV? The way it is worded is slightly confusing, but I took it to mean that you have two separate displays - one is your Samsung TV, the other is an as-yet undescribed display. 

You got some results with your Samsung TV (I'm presuming that is HDMI), but it sounds like the image you were using may have hung during the unpacking process on the first boot. Sometimes simply rebooting brings you to the next stage.

Hi Ghost

Thanks for your reply. Sorry that I confused you.
My display is the "Touch Screen" (The PINE A64+ Box w/ Touch Screen) from Pine64. I tried out the android image which I found on thw wiki page.
Yes, I am using HDMI at the Samsung TV.

I can't 'reboot' the pine, bc I have overriden my sd card ;(

Ok. So you know that there are Android images meant for a HDMI TV and a different one designed for use with the touchscreen?

What method are you using to burn the OS images?

Have you connected the touchscreen securely to both connectors on the Pine A64 board?