I did as you suggested: copied zip files to a partition around 24-26GB. No errors were thrown.
After that, I again flashed Manjaro ARM xfce 22.06 for PBP to the eMMC using Gnome Disks. Then, I flashed the previously saved partition 2 of the old working eMMC to partition 2 of the new eMMC. The saved .img file has 50.3 GB and partition 2 of the new eMMC has 62 GB.
I did this five times and every time the flash process stopped with the following error:
attempt 1: offset = 39154876416
attempt 2: offset = 37957402262
attempt 3: offset = 33597423616
attempt 4: offset = 32544653312
attempt 5: offset = 32437698560
Thus, flashing the partition 2 image of the old (working) eMMC is somehow not possible. But copying zip files is working fine.
After that, I again flashed Manjaro ARM xfce 22.06 for PBP to the eMMC using Gnome Disks. Then, I flashed the previously saved partition 2 of the old working eMMC to partition 2 of the new eMMC. The saved .img file has 50.3 GB and partition 2 of the new eMMC has 62 GB.
I did this five times and every time the flash process stopped with the following error:
Code:
Error writing 1048576 bytes to offset x: Input/output error (g-io-error-quark, 0)
attempt 1: offset = 39154876416
attempt 2: offset = 37957402262
attempt 3: offset = 33597423616
attempt 4: offset = 32544653312
attempt 5: offset = 32437698560
Thus, flashing the partition 2 image of the old (working) eMMC is somehow not possible. But copying zip files is working fine.