Need a working image for Quartz64B
#10
(08-11-2022, 09:48 PM)Excalibur Wrote: Just got a model B and tried to do some verification. I have tried the following 2 images, but none of them is working correctly:

...

The serial cable and settings works correctly on a Radxa ROCK 4 so this has to be the board's issue right? (Right?) I tried to replace the DC power supply with another one with no avail since I think there might be some noise from the ground plane. They are 2 prong design though.

I tried (an older version of) https://forum.pine64.org/showthread.php?tid=17779 and that worked fine, both on Model A as Model B (they're separate images!).

I did have problem with the serial console (woodpecker) on the Model B, but it worked fine on Model A.
Need to look into it further at some point.
But despite there being no serial console output, I did notice the NIC light going on and also on my switch and after some time I was able to SSH into it.
  Reply


Messages In This Thread
Need a working image for Quartz64B - by Excalibur - 08-11-2022, 09:48 PM
RE: Need a working image for Quartz64B - by t4_4t - 08-12-2022, 04:21 PM
RE: Need a working image for Quartz64B - by t4_4t - 08-12-2022, 05:22 PM
RE: Need a working image for Quartz64B - by diederik - 01-02-2023, 02:56 PM
RE: Need a working image for Quartz64B - by tllim - 01-23-2023, 09:02 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Quartz64B eMMC boot failure bsmorgan 2 769 11-15-2023, 12:00 AM
Last Post: balbes150
  can't get quartz64-A working jyoung 14 5,573 04-29-2023, 04:41 PM
Last Post: diederik
Tongue Trying to get Quartz model A working fasani 2 2,468 09-17-2022, 06:43 AM
Last Post: balbes150

Forum Jump:


Users browsing this thread: 1 Guest(s)