Audio Pot Board Questions
> ... white 6 pin socket ...
It simply pulls out the signal as shown in the schematic.
Probably, it seems to be a terminal assuming the case of connecting another I2S-device (DAC etc...) to the outside.

> ... which pin is pin 1.
Look at the back of the board, there is a (50M / MCLK) silk mark.
The part where 50M is printed is pin 1.


However, even if you select the MCLK side, it will not work properly in many cases.
This is because many kernels are not set to output MCLK to the outside.
You can find such a post by searching the forum thread here.

Messages In This Thread
Audio Pot Board Questions - by vfr400racer - 04-17-2022, 01:51 PM
RE: Audio Pot Board Questions - by t4_4t - 04-17-2022, 06:54 PM
RE: Audio Pot Board Questions - by vfr400racer - 04-18-2022, 01:23 PM
RE: Audio Pot Board Questions - by Roberto2020 - 08-11-2022, 06:34 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Rock64 4K60P HDR Media Board Computer 64 bit MarkHaysHarris777 8 13,202 07-14-2021, 11:52 PM
Last Post: jontumontu
  Help connecting a dvb board in the right gpio pins cosmodeal 0 1,539 11-11-2020, 12:48 PM
Last Post: cosmodeal
  Rock64 stereo audio dac add-on board with RockPro64 Tim13 1 2,679 07-08-2019, 07:15 PM
Last Post: tllim
  Rock64 Stereo Audio DAC add-on board Hukmut 3 4,201 06-15-2019, 07:56 AM
Last Post: MiiCode2
  "ROCK 64 STEREO AUDIO DAC ADD-ON BOARD", Is it okay if I turn on the power ? t4_4t 4 4,214 01-09-2019, 01:02 AM
Last Post: t4_4t
  ROCK64 STEREO AUDIO DAC ADD-ON BOARD and USB serial adapter for Pine64 jovval 2 2,681 12-01-2018, 03:53 AM
Last Post: jovval
  ROCK64 STEREO AUDIO DAC ADD-ON BOARD angelscream09 7 6,084 11-21-2018, 07:02 PM
Last Post: antonv
  ROCK64 STEREO AUDIO DAC ADD-ON BOARD Sketch killor 4 4,960 11-12-2018, 07:37 AM
Last Post: killor
  ROCK 64 board unresponsive S265 1 1,921 08-05-2018, 06:51 AM
Last Post: paradise
Lightbulb Looking for donor board to replace voltage regulator or any other ideas? ansic 1 2,099 04-15-2018, 09:15 PM
Last Post: tllim

Forum Jump:

Users browsing this thread: 1 Guest(s)