PineTime Touch Screen Stopped Working
#1
Hello All,
I am running InfiniTime
FW 1.8.0
HW 1.0.0
all had been going well with the watch since I got it until today when the touch screen stopped working. I have been running 1.8.0 since Feb 21. I have tried rebooting by holding the power button, I tried installing the 1.9.0 version on InfiniTime hoping that would reset things but the touch screen still is not working. The power button still works and I can still connect it to Gadgetbridge.  It is a sealed watch so I have no access to the internals.  My current plan is to let the battery die and see if that will reset anything.  Please let me know if you have any recommendations and I will post again if anything changes.
  Reply
#2
So the battery died then I charged it up and there was no change. Any ideas on what I should try next?
  Reply
#3
maybe it's make sense to open a ticket under support.pine64.org.
Away
  Reply
#4
hello. in my case, every time the clock warmed up in the sun, the touchscreen stopped working. heating did not last long. I'm inclined to believe that the touchscreen deteriorates from heating or soldering falls off somewhere inside Sad even from not very high heat (I live in the north and there is no heat here) Sad terribly upset .. two hours out of three died. all sealed and I can't open them.. Sad
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Pinetime stuck at infinitime logo monto 2 230 07-30-2022, 06:16 AM
Last Post: kng
  can anyone suggest their working Linux bluetooth USB dongles to connect to Pinetime? jahway603 4 195 07-27-2022, 07:38 PM
Last Post: jahway603
  Pinetime almost dead... only shows Infinitime logo. lightweight 6 1,327 06-18-2022, 03:21 AM
Last Post: bboett
  Any plans for a revised PineTime? nixcamic 0 477 05-16-2022, 11:14 AM
Last Post: nixcamic
  Accelerometer stopped working victor9 11 2,120 05-01-2022, 04:59 AM
Last Post: cpi
  Any hope for PineTime. lakotaubp 5 1,057 04-25-2022, 07:49 AM
Last Post: lakotaubp
Question What can/can't I do with a PineTime smart watch (sealed)? danimations 7 1,684 04-16-2022, 07:18 AM
Last Post: _slowmanship_
Question [question] how to restore PineTime to a factory state after flashing non-OTA/directly ITCactus 2 586 04-11-2022, 05:03 AM
Last Post: ITCactus
  Will the PineTime have a timer for the Pomodoro technique? bosi564 3 945 04-05-2022, 03:28 AM
Last Post: ITCactus
Lightbulb Saving, loading, sending and receiving images via Bluetooth to and from Pinetime danimations 0 341 03-29-2022, 01:21 AM
Last Post: danimations

Forum Jump:


Users browsing this thread: 2 Guest(s)