How do I even turn that thing on?
#1
I got the Manjaro ARM image as shown on the Wiki, wrote it to the SD card, but doesn't seem to boot up at all.
Code:
$ [font=monospace][color=#000000]sudo dd if=Manjaro-ARM-minimal-quartz64-bsp-20210830.img of=/dev/sde[/color][/font]
[font=monospace][color=#000000][sudo] 〇〇 の[/color][font=monospace][color=#000000]パスワード:[/color][/font][/font]
[font=monospace][font=monospace][color=#000000][font=monospace][color=#000000]3282944+0 レコード入力[/color][/font][/color][/font][/font]
[font=monospace][font=monospace][color=#000000][font=monospace][color=#000000][color=#000000][font=monospace]3282944+0 レコード出力[/font][/color][/color][/font][/color][/font][/font]
[font=monospace][color=#000000]1680867328 bytes (1.7 GB, 1.6 GiB) copied, 341.033 s, 4.9 MB/s[/color][/font]
[font=monospace][color=#000000][/color][/font]
[font=monospace][color=#000000][font=monospace][color=#000000]$ lsblk [/color]
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
...
sde      8:64   1  14.4G  0 disk  
├─sde1   8:65   1     7M  0 part  
├─sde2   8:66   1 213.6M  0 part  
└─sde3   8:67   1   1.3G  0 part[/font][/color][/font]
[font=monospace][color=#000000][font=monospace]
[/font][/color][/font]

[font=monospace]Lights are turning on, but nothing on screen, no sound or heat coming from the board, power button does absolutely nothing etc.[/font]
母語は日本語ですが、英語も喋れます(ry
  Reply
#2
If you read the wiki, you will see, that there is no videodriver for the Quartz64 board yet. You can only access it through a serial cable to the debug console.
  Reply
#3
(09-04-2021, 10:02 AM)Alho Wrote: If you read the wiki, you will see, that there is no videodriver for the Quartz64 board yet. You can only access it through a serial cable to the debug console.

There's no mention of it on the Wiki from what I can see.
I could buy a serial cable from the Pine store, but I think that would take another month for it to arrive, so perhaps I'll just browse a local electronics store for one.
Alternatively I can live with doing everything over SSH (I actually prefer it anyway) if the current Manjaro image even has it enabled by default.
母語は日本語ですが、英語も喋れます(ry
  Reply
#4
https://wiki.pine64.org/wiki/Quartz64_Development

Says video output needs porting (rockchipdrm/VOP-v2) on red background.

Below, under "Needs Testing" GPU — need a VOP-v2 DRM driver to get display output.

That page is linked from main Quartz64 wiki page.
  Reply
#5
(09-04-2021, 09:26 PM)lot378 Wrote: https://wiki.pine64.org/wiki/Quartz64_Development

Says video output needs porting (rockchipdrm/VOP-v2) on red background.

That page is linked from main Quartz64 wiki page.

When Alho said "read the wiki", I assumed he meant the main page for Quartz64.
But alright, I might try to see if I can get it working in case it's still waiting on the TODO list, though pretty certain I'd not get it to work before anyone else does as I have 0 hardware or driver programming experience.
母語は日本語ですが、英語も喋れます(ry
  Reply
#6
You should be able to easily find a 1.5 mbaud capable uart usb to serial adapter locally. It needs to be able to operate at 3.3V. Personally, I use a CH340G based one.

The Manjaro image should provide ssh access in its first time setup thing, so you can ssh into the board even without an UART adapter. I still strongly recommend you get one though for u-boot output and general debugging.

I'll add a note to the main wiki page that details that there's no video output yet
  Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)