Hello my frend. How to fix my boot problem?
#1
Tongue 
I am a new user in Linux and a new owner of a pinebook pro from Russia Smile . How to fix booting after incorrect installation of Manjaro?[Image: 8352IMG_0859_800.jpg][Image: i.gif][Image: IMG_0858_800.jpg][Image: i.gif]
  Reply
#2
i installed uboot-pinebookpro-bsp visual artifacts disappeared, in which direction to look, prompt to fix errors:
[ 1.830285] OF: graph: no port node found in /i2c@ff3d0000/fusb30x@22
[ 2.509700] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 2.936889] rockchip-dp ff970000.edp: no DP phy configured
[ 3.059417] usb 2-1.2: device not accepting address 3, error -71
  Reply
#3
until the software problems are solved, I decided to decorate the appearance Smile [Image: IMG_0861_800.jpg][Image: i.gif], [Image: IMG_0862_800.jpg][Image: i.gif], [Image: 41472IMG_0863_800.jpg][Image: i.gif]
  Reply
#4
Probably your easiest route at this point is just to reinstall Manjaro (or your choice of other operating system) anew.

You can write a bootable image to micro-sd card and boot that, and then install to eMMC. Or, you can remove the eMMC and flash it in another computer with an adaptor.
:wq



[ SRA accepts you ]
  Reply
#5
(07-03-2021, 08:16 PM)KC9UDX Wrote: Probably your easiest route at this point is just to reinstall Manjaro (or your choice of other operating system) anew.

You can write a bootable image to micro-sd card and boot that, and then install to eMMC.  Or, you can remove the eMMC and flash it in another computer with an adaptor.
I have already reinstalled many times from micro sd to emms. all I have achieved is the green artifacts on the screen have disappeared and the errors remain. there are no errors when booting from a micro SD image mrfixit2001.
  Reply
#6
Well, you probably don't want to hear my opinions about Manjaro. Smile I do have it running on my wife's PBP, but I only update it every six months and so far have been lucky, I guess. My PBP runs NetBSD, and (now very, very rarely) the mrfixit2001 Debian.
:wq



[ SRA accepts you ]
  Reply
#7
(07-03-2021, 09:33 PM)carinosa Wrote:
(07-03-2021, 08:16 PM)KC9UDX Wrote: Probably your easiest route at this point is just to reinstall Manjaro (or your choice of other operating system) anew.

You can write a bootable image to micro-sd card and boot that, and then install to eMMC.  Or, you can remove the eMMC and flash it in another computer with an adaptor.
I have already reinstalled many times from micro sd to emms. all I have achieved is the green artifacts on the screen have disappeared and the errors remain. there are no errors when booting from a micro SD image mrfixit2001.
In that case you can try to install the U-boot from mrfixit2001.
Perhaps this thread can help: https://forum.pine64.org/showthread.php?tid=10031
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  U-Boot with direct NVMe boot support for eMMC/SPI Flash pcm720 120 110,018 09-11-2021, 02:16 PM
Last Post: calinb
  very strange .pptx highlight color problem stozi 0 69 09-02-2021, 02:50 PM
Last Post: stozi
  My pbp is a sleek, black, flat brick, and won't boot from any kind of media rotwang 15 2,363 08-24-2021, 04:25 PM
Last Post: bkenn
  How can I flash SPI so that I can boot from NVMe? codingpanic 5 603 08-24-2021, 05:07 AM
Last Post: codingpanic
  U-Boot, video console, and visual artifacts dsimic 15 2,306 07-28-2021, 09:37 AM
Last Post: dsimic
  boot order straightwalker 6 663 07-22-2021, 12:31 AM
Last Post: wdt
  cannot boot SD card : "unable to select a mode" alchemist 0 340 06-18-2021, 02:03 AM
Last Post: alchemist
  Pinebook Boot CharlesBunders 14 3,031 06-15-2021, 07:40 PM
Last Post: James Good
  PBP won't boot alchemist 5 972 06-07-2021, 09:31 AM
Last Post: alchemist
Video Problem Booting from SD card ezryder324r 0 344 05-19-2021, 02:42 PM
Last Post: ezryder324r

Forum Jump:


Users browsing this thread: 1 Guest(s)