Talos on ROCK64
#1
I'm trying to get Talos working on my oldish Rock64 board. The PCB says, "ROCK64 V2.0 2017." The Talos devs have a distribution for ROCK64, and one of their engineers says he's got it running on a ROCK64 board. His says "V3 2019." His works, mine doesn't. But mine works just fine when it's running Ubuntu.

According to my packet sniffer, my ROCK64 never sends a DHCPDISCOVER packet. But it seems like the ROCK64 thinks it sent one, and it's waiting for a reply that never comes.

Does it seem likely that there's a hardware or firmware difference between V2 and V3 that's preventing the Talos Linux kernel from talking to the ethernet? Or does it seem more likely that I've messed up my network somehow?

I'm attaching two excerpts from the console log running Talos.


Attached Files
.txt   dmesg1.txt (Size: 1.68 KB / Downloads: 44)
.txt   dmesg2.txt (Size: 1.03 KB / Downloads: 47)
  Reply
#2
Have you double checked your OS media and power?  These should be the first 2 things you look at when troubleshooting pretty much any issue, before even going further into some other things you speculate here.  If nothing else than to eliminate them as possibilities.

Following link is for Armbian, but most of it is generally applicable to any SBC. 

https://docs.armbian.com/User-Guide_Basi...eshooting/

Don't believe me?  These are so common that we have an entire sub-forum dedicated to them:  https://forum.armbian.com/forum/31-sd-ca...su-issues/  And also why this info is mentioned first, right at the top of troubleshooting section (linked above).
  Reply
#3
(06-03-2021, 08:58 PM)TRS-80 Wrote: Have you double checked your OS media and power?

Thanks for the links, TRS-80. I have 5 identical boards all supplied by PoE splitters from the pine64 store. They're connected via short CAT5e cables to a switch that claims it's delivering 17W out of 150W that it's capable of. So I think I'm good on the power supply.

The ROCK64 is powering a small USB hard drive also. I tried unplugging that and repeating the boot, and I got the same results.

I've tried flashing the SD cards twice: Once from a Mac using dd, and once from Windows using rufus. Still, I just tried again using balena etcher, and I get the same result.

Do you think I've been thorough enough checking the power and media?
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  rock64-debian-mrfixit-190531.img.xz : missing /usr/lib/dri/rockchip_dri.so popi 3 53 Yesterday, 12:16 PM
Last Post: popi
  slarm64 (unofficial slackware) Rock64 RK3328 (aarch64) mara 114 66,088 Yesterday, 10:52 AM
Last Post: mara
  openwrt for the rock64 wilsonYan 15 7,125 06-28-2021, 09:50 PM
Last Post: wilsonYan
  Centos 8 Stream on Rock64 ayoungdukie 1 341 06-07-2021, 11:50 AM
Last Post: zer0sig
  CentOS 7 for Rock64 pineadmin 3 3,235 05-30-2021, 08:20 AM
Last Post: ayoungdukie
  Rock64 CRUX-ARM (aarch64) mara 0 275 05-27-2021, 02:22 PM
Last Post: mara
  DietPi OS for ROCK64 MichaIng 15 4,904 05-24-2021, 07:46 AM
Last Post: MichaIng
  RETRO-GAMING: UPDATED RELEASE OF RECALBOX FOR THE ROCK64 Mrfixit2001 32 26,478 05-22-2021, 07:01 AM
Last Post: fartadeadrian
  Armbian for Rock64 pineadmin 31 22,814 05-08-2021, 09:35 AM
Last Post: Wizzard
  Setting a MAC on Rock64 U-Boot kiriakos 2 834 03-23-2021, 04:51 AM
Last Post: kiriakos

Forum Jump:


Users browsing this thread: 1 Guest(s)