PCIe gen1 timeout - how to debug
#4
(04-28-2021, 01:49 PM)tosi Wrote:
(04-28-2021, 11:28 AM)LMM Wrote:
(04-27-2021, 12:24 PM)tosi Wrote: Hi everybody,

-- short version for the impatient :-)

I have 2 questions:
- when does the yellow LED go on/off on the ASM1062 board?
- what is the minimal setup of rockpro64 that should not show "gen1 timeout" errror but some entries in lspci etc?


-- long version

i have bought 
  • a rockpro64 2.1 board (builddate 2018-07-02)
  • according 60W power supply
  • nas case
  • asmedia 1062 pcie board
  • 14 TB Toshiba SATA disk
  • 512 MB Sandisk SATA SSD
i have ~5% chance in cold-boot (attaching power-barrel after ~1 h downtime) that uboot and/or linux kernel get the pciE devices to work.
In these cases I see activity on yellow LED mounted on the pcie-board (under the sata-ports). The activity starts early in the boot process

However, most of the time both u-boot as well the kernel complain:

rockchip_pcie pcie@f8000000: PCIe link training gen1 timeout!

resulting in no pci / SATA devices were found/listened.
I am now trying to get to the bottom of this and how to prevent it.
I have read many differrent advices (e.g. increasing timeouts.) in this forum and similar places. However neither the root-cause of this error nor  minimum setup is that should work is clear to me.

I have tried several combinations, including but not limited to:
- board w/o sata card
- board w sata-card, but no disks, 1 disk, both disk..
- board with sata card and power, but no sata cable
- board with sata card and cables.
....

with all of these combinations i can 
  • see the gen1 timeout on u-boot. 
  • When starting u-boot and issuing the

    pci

    command, i usually get "No such Bus" back.
I tried all different sort of U-Boot at the moment working on a self-compiled u-boot master (SPL 2021.07-rc1-dirty). 
Also trying to relax the timeout leading to the gen1 error message from 500 msec up to 25 sec didn't solve the problem yet.

I suspect there is either a timing and/or powering issue on the board. but i am a bit clueless how to debug further.

Any help or pointer is highly appreciated.

Were you ever able to resolve this? Recently started getting the same.
  Reply


Messages In This Thread
PCIe gen1 timeout - how to debug - by tosi - 04-27-2021, 12:24 PM
RE: PCIe gen1 timeout - how to debug - by LMM - 04-28-2021, 11:28 AM
RE: PCIe gen1 timeout - how to debug - by tosi - 04-28-2021, 01:49 PM
RE: PCIe gen1 timeout - how to debug - by db579 - 03-10-2022, 05:06 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  PCIE interface power on too late Slark Xiao 0 57 11-29-2022, 11:56 PM
Last Post: Slark Xiao
  Anyone try an NVIDIA GPU in the PCIe slot? Paraplegic Racehorse 0 1,269 04-15-2021, 11:46 AM
Last Post: Paraplegic Racehorse
  Never ever mix up CPU board connector with 8-pin PCIE connector LMM 0 1,322 02-11-2021, 10:18 AM
Last Post: LMM
  PCIe Armbian and Ayufan for nvme ssd LMM 1 1,967 02-03-2021, 04:38 PM
Last Post: LMM
  fan continously runs on kernel 5.8 but I need to use 5. kernel for PCIe sata card GreyLinux 4 4,270 10-20-2020, 10:52 AM
Last Post: GreyLinux
  PCIe x4 mode - Lane 3 failure acdkyn 1 2,089 04-24-2020, 01:32 PM
Last Post: kuleszdl
  Considering buying and question on the PCIe slot MobileJAD 25 35,052 11-07-2019, 03:10 PM
Last Post: hmuller
  RockPro64 pcie Gpu Davidos 1 2,745 06-09-2019, 02:09 PM
Last Post: guannais
  login to GUI desktop hangs when PCIe SSD is plugged in grimace 3 3,969 04-24-2019, 04:24 PM
Last Post: Luke
  PCIe SSD drive still not working ?? dr_ju_ju 7 7,144 04-15-2019, 04:16 PM
Last Post: tllim

Forum Jump:


Users browsing this thread: 1 Guest(s)