04-18-2021, 06:54 AM
This Interact: http://www.oldcomputers.net/interact.html I don't think I tried to take the keyboard apart but I've since fixed remotes with the same sort of keyboard. There's a circuit board with contacts. Another sits on top of it and has bubbles in plastic with contacts at the top, when you push a button the bubble flattens so the bubble's contacts touch the lower board. If you take them apart and clean the contacts with alcohol you can usually get them working again, for a while. This was 1980s.
Yes, firmware updated in December. And it says this:
So software settings can affect the characters typed.
I haven't done this, which I think is just for the brightness keys, since I went from mrfixit Stretch to the Daniel Thompson Bullseye. https://github.com/ayufan-rock64/linux-package Looks like the fix lives in your eMMC or sd card so it would be only on the eMMC. I have nothing in /etc/udev/hwdb.d
Yes, firmware updated in December. And it says this:
Code:
When done, if some of the keys produce incorrect characters, please check
your OS’s language settings. For ANSI users, the default OS shipped with
English UK as the default language. You can change it to English US if
desired.I haven't done this, which I think is just for the brightness keys, since I went from mrfixit Stretch to the Daniel Thompson Bullseye. https://github.com/ayufan-rock64/linux-package Looks like the fix lives in your eMMC or sd card so it would be only on the eMMC. I have nothing in /etc/udev/hwdb.d