PineTime runs only with 3.3V via pogopin
#3
Now that your device has started with the pins connected to the pi, does it still runs if you disconnect them?
Maybe pinetime-updater failed for whatever reason, and the device was stuck in programming mode. I guess that connecting the pins to the pi issued a reset, and you should be good to go.

If it stops when it's not connected to the pi, maybe the battery is empty and that it works because the pi is feeding power to the pinetime? Have you tried to charge your device?

If you have a stlinkv2, you can try to follow these instructions to flash your device using openocd.
Working on InfiniTime, the FOSS firmware for the PineTime: https://github.com/InfiniTimeOrg/InfiniTime

Mastodon : https://mastodon.codingfield.com/@JF
Twitter : https://twitter.com/codingfield
Matrix : @JF002:matrix.org


Messages In This Thread
RE: PineTime runs only with 3.3V via pogopin - by JF002 - 12-18-2020, 05:45 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  PineTime at FOSDEM jmlich 5 625 02-07-2024, 11:48 PM
Last Post: tllim
  PineTime turns off when removed from cradle tynstar 0 183 01-31-2024, 11:57 AM
Last Post: tynstar
  PineTime and Amazfish on Ubuntu Touch jmlich 1 645 10-14-2023, 04:12 PM
Last Post: tllim
  PineTime is dead!! Markdanni123 12 13,506 09-18-2023, 10:17 PM
Last Post: ccchan234
  PineTime Sleep Tracking any_mouse 12 12,016 07-10-2023, 05:41 PM
Last Post: davidair
  PineTime Dead out of box? henkery 1 1,152 03-12-2023, 04:34 PM
Last Post: henkery
  Pinetime almost dead... only shows Infinitime logo. lightweight 8 6,513 02-11-2023, 09:30 AM
Last Post: alexmitroff
  PineTime beginner MV1791 2 2,089 01-09-2023, 11:52 PM
Last Post: Canyonless
  Struggling to detect Pinetime over bluetooth John45595 0 1,121 11-20-2022, 11:06 PM
Last Post: John45595
  PineTime Dev Kit for sale igor.bljahhin 2 3,132 10-19-2022, 05:34 AM
Last Post: peatord

Forum Jump:


Users browsing this thread: 1 Guest(s)